Owner's Manual

ATTACHING SWEEPER HITCH TO TRACTOR
1. Placethetractorandsweeperonaatlevelsurface.
2. Set the sweeper height adjustment to about the
middle of the adjustment range.
3. Attach the sweeper hitch to the tractor hitch, with the
hitch brackets arranged according to the drawbar
heightofyourtractorasshowningure19belowand
ingure6onpage6.
4. Arrange the spacers into one of the three possible
combinationsasshownbelowingure19.
IMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximatelylevelwiththegroundasshowningure18.
FIGURE 18
GROUP "B" VEHICLES
WITH HITCHES
HAVING 9" TO 11"
GROUND CLEARANCE.
GROUP "A" VEHICLES
WITH HITCHES
HAVING 11" TO 13"
GROUND CLEARANCE.
GROUP "C" VEHICLES
WITH HITCHES
HAVING 7" TO 9"
GROUND CLEARANCE.
FIGURE 19
STEP 17: (SEE FIGURE 17)
• Attach the hopper bag to the sweeper by sliding
the pivot bolts in the hopper tubes into the pivot rod
retainers in the ends of the bag arm channels.
FIGURE 17
APPROXIMATELY LEVEL
(6" to 8" FROM SURFACE)
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
9