Manual

INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1: (SEE FIGURE 2)
* Open parts bag labelled "A" and verify that all parts
are present.
NOTE: Place cardboard ora mat on work surface to prevent
scratching of parts removed from carton and tractor.
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
PARTS BAG "A"
FIGURE 2
Ref. Part Qty. Description
A 43350 4 Carriage Bolt, 3/8-16 x 1"
B 44072 4 Whiziock Nut, 3/8"
C R19171616 4 Washer, 1/2" x 1"
D 44742 2
Plug
65932 1 Bumper
STEP 2: (SEE FIGURE 3)
• Remove tractor hood. (Refer to tractor manual.)
• Remove the browning shield as shown.
STEP 3: (SEE FIGURE 4)
* Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for second
plug.
STEP 4: (SEE FIGURE 5)
* Insert a carriage bolt into the second mounting hole
from the front of the tractor frame and fully tighten a
whiziock nut onto the bolt. Repeat on other side of
tractor.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE