Manual

STEPS: (SEE FIGURE 6)
• Spread ends of bumper enough to fit slots onto bolts
in rear mounting holes in tractor frame.
* The bumper has three mounting holes. The rear
hole provides the most clearance while the forward
holes provide a neater appearance. Use a hole
that provides enough clearance for hood to stay in
raised position when opened. Insert a carriage bolt
and washer through tractor frame and into desired
mounting hole on each side of bumper and secure
with a whiz lock nut.
IMPORTANT: Before fully tightening nuts, be sure
tractor hood will stay in raised position when opened.
STEP 6: (SEE FIGURE 7)
* Replace the browning shield using the front screws
you removed in Step 2.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE