Manual

INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 1: (SEE FIGURE 2)
• Open parts bags labelled "A" and "B" and verify that
all parts needed are present.
NOTE: Place cardboard ora mat on work surface to prevent
scratching of parts removed from carton and tractor.
NOTE: Not all hardware will be used. Unused parts may be
discarded after assembly
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
В
(not full size)
^ (parts bag "A") (parts bag "A")
PARTS BAG B figure 2
Ref. Part Qty. Description
A 48894 2 Self Threading Bolt, 3/8-16 x 1-1/2"
В 43062 2 Hex Bolt, 3/8-16 X 1-1/2"
C 43001
4
Hex Bolt, 3/8-16 X 1"
D 44072
4
Whiziock Nut, 3/8"
E 43003 4 Lock Washer, 3/8"
F 44742 2
Plug
65932 1 Bumper
STEP 2: (SEE FIGURE 3)
• Remove tractor hood. (Refer to tractor manual.)
* Remove an (LT) Lawn Tractor heat shield like the one
shown. Remove a (GT) Garden Tractor heat shield
like the one shown only if you need access to inside
of tractor frame during step 5.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE