Owner`s manual

iii iiiiiii1,,111
ASSEMBLY
H =l= =H,N ::::::::::::::::::::::::::::::::
HOW TO MOUNT
THE FRAME ASSEMBLY
Remove and discard the two self=tapping screws from the
rear of the framer Use these two holes to mount the
frame bracket_ FrameBracket
,
Attach the bottom of the frame bracket to the frame with hex
bolt (A} and Iocknut (B) Do not tighten at this t_me=
(A)
lx125
(D)
17x51
2.
15x41 __
(E)
15x108
0-8t19
(A)
Channel
3_ Attach the back of the frame bracket to the frame with bolts
(C), washers (D) and flange nuts (E)._Make sure botts (C) and
flange nuts (E) are tight.
NOTE: For easier assembly, use a ratchet and socket to
tighten bolts (C).
4_ Tighten bolt (A) and Iocknut (B}.
5.. Slide the channel in tothe "U" shape opening in the top oftha
frame bracket as shown,
"U" Shape
Opening \
D-8_20
Frame Bracket
F-91726 14