Specifications

ASSEMBLY
DANGER
Always connect positive (red) cable firsL Connect-
ing negative cable first can result In sparks if the
wrench touches any metal surface. Be sure battery
hold-down bracket does not touch battery terminals
and cause a spark_
REINSTALL CHARGED BATTERY
(See FIG. 6)
• Raise seat and place battery back in tractor
with positive(+) terminal toward rear of tractor. NOTE: Be
sure ignition key is in OFF position,
• Position battery hold-down bracket onto top left edge of
battery (opposite terminals).
• Reinstall bolt. Tighten bolt to secure battery,
• Attach positive (+) red battery cable to positive (+)
terminal on battery with a 1/4 X 3/4 inch head screw and
a 1/4 inch keps nut, Tighten nut securely,
• Place battery boot over positive(+) battery terminal (see
Fig, 6 inset).
• Attach negative (.) black battery cable to negative (*)
terminal on battery with a 1/4 X 3/4 inch hex head screw
and a 1/4 inch keps nut. Tighten nut securely.
NEGATIVE BLACK
BATTERY CABLE
BATTERY
BOOT
\
PoSrrlVE (+) RED
BATTERY BATTERY CABLE
BATTERY HOLD.DOWN BRACKET
BOLT
%
114 X 3/4 INCH HEX HEAD SCREW
BATTERY
114 X 3/4 INCH HEX HEAD SCREW
NEGATIVE(-] BATTERY
TERMINAL
NEGATIVE (-) BLACK
BATTERY CABLE
POSITIVE (,,) BATTERY TERMINAL
CUT-AWAY VIEW FROM RIGHT-HAND SIDE OF _ RACTOR
POSITIVE (+) RED BATTERY CABLE
FIG. 6
,/ CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTfON FROM
THtS QUALITY PRODUCT,
PLEASE REVIEW THE FOLLOWING CHECKLIST:
/ AUassembly instructionshave been compteted_
,/' No'remaining loose parts in carton.
4" Battery is property prepared and charged. (Minimum 1
hour at 6 amps),,
,t' Seat is adjusted comfortablyand tightened securely
/ All tires are properly inflated_(For shipping purposes, the
tires were over-inflated at the factory),
.t" Be sure mower deck is propedy leveied side-to-side/
front-to-rear for best cutting resuitso (Tires must be prop-
erly inflated for leveling)
/ Check mower and drive befts. Be sure they are routed
properly around pulleys and inside aUbelt guides.
!/' Check wiring. See that atl connections are secure and
wires are properly clamped_
WHILE LEARNING HOW TO USE YOUR TRACTOR,
PAY EXTRA ATTENTION TO THE FOLLOWING
IMPORTANT ITEMS:
/,f Engine oil is at proper level.
,// Fuel tank is filled with fresh, clean, regular Unleaded
gasoline,
,/#" Become famitiar with all controls-their location and
function, Operate controls before starting engine,
// Be sure brake system is in safe operating condition,
10