Snow Blower User Manual

CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
Fill in dates as
you complete
regular service
Check Engine Oil Level
Change Engine Oil
Tighten All Screws & Nuts
Lubricate Pivot Points
Check Auger Clutch Cable
Adjustment (See Cable Adj)
Check Ddve Bert
Check Fuel
Drain Fuel
Replace Spark Plug
After
first 2
Hours
SCHEDULE
SERVICE
DATES
Before AS Every Ever_ Every
Each Needed! 5 10 25
Use Hours Houri Hours
_" v"
p-
v*
Each Before
Seaso¢ Storage
v"
PRODUCT SPECIFICATIONS
HORSE POWER: 5HP
DISPLACEMENT: 12.04 cu. in.
GASOLINE CAPACITY: 2 quart
(unleaded)
OIL (20 oz. Capacity) : 5W-30
;PARK PLUG: Champion RJ19LM
(Gap .030) or
Equivalent
VALVE CLEARANCE: Intake: 0.10 In.
Exhaust: .010 In.
SNOW THROWER
AFTER FIRST USE
• Check for any loose or damaged parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
AFTER EACH USE
• Remove all snow and slush off the snow
thrower to prevent freezing of auger or
controls.
• Check controls to make sure they are
functioning properly.
• If any parts are worn or damaged,
replace immediately.
SNOW THROWER
ENGINE LUBRICATION
Check the crankcase oil level (see figure be-
low) before starting the engine and after
each five (5) hours of continuous use. Add
S.A.E. 5W30 motor oil as needed. Tighten
fill cap/dipstick securely each time you
check the oil level. S.A.E. 0W30 motor oil
may be used to make starting easier in ar-
eas where the temperature is 20 ° F or
lower.
e
v betweenfull and add mark
I
13