Manual

TROUBLE CAUSE CORRECTION
Difficult starting Replacespark plug.
Engine runs erratic
Engine stalls
Engine runs erratic;
Loss of power
Excessive vibration
Unit fails to propel itself
Unit fails to discharge
snow
Defective spark plug.
Water or dirt in fuel system.
Blocked fuel line, empty gas
tank, or stale fuel mixture.
Unit running on CHOKE.
Water or dirt in fuel system.
I Damaged auger assembly
Loose parts. Damaged
impeller.
Drive belt loose or damaged.
Incorrect adjustment of auger
drive cable
Use carburetor bowl drain to
flush and refill with fresh fuel
mixture.
Clean fuel line; check fuel
supply; add fresh fuel
mixture.
Set choke lever to run or off
position.
Use carburetor bowl drain to
flush and refill with fresh fuel
mixture.
Repair or replace the auger
assembly.
Immediately stop engine.
Remove ignition key. Tighten
all fasteners and make all
necessary repairs. If
vibration continues, take the
unit to a Sears authorized
service center.
Replace drive belt.
Adjust auger drive cable.
Auger drive belt loose or Adjust auger drive belt;
damaged, replace if damaged.
Auger control cable not Adjust auger control cable.
adjusted correctly.
Discharge chute clogged. Stop engine immediately and
disconnect spark plug wire.
Clean discharge chute and
inside of auger housing.
Foreign object lodged in Stop engine immediately and
auger disconnect spark plug wire.
Remove object from auger.
F-001128M 21