Operating instructions

HOWTO USEYOURPRESSUREWASHER
If you haveany problems operatingyour pressure washer,
please call the pressure washer helpline at 1-800-222-3136.
Pressure Washer Location
ClearancesandAirMovement
I A WARNING 1
Keepat least5ft. (152cm)clearanceonall sidesof pressure
washerincludingoverhead.
Placepressure washer outdoors in an areathat will not
accumulate deadly exhaust gas. DONOTplace pressure
washer where exhaust gas could accumulate and enter inside
or be drawn into a potentially occupied building. Ensure
exhaust gas is kept awayfrom any windows, doors,
ventilation intakes or other openings that can allow exhaust
gas to collect in a confined area. Prevailingwinds and air
currents should be taken into consideration when positioning
_ressurewasher.
_, WARHIHG
OperatepressurewasherONLYoutdoors.
Keepexhaustgasfromenteringaconfinedareathrough
windows,doors,ventilationintakesor otheropenings.
DONOTstart or runpressurewasherindoorsor in anenclosed
area,evenif windowsanddoorsareopen.
_ '7"_-- ExhaustPort
To Start Your Pressure Washer
To start your pressure washer for the first time, follow these
instructions step-by-step. This starting information also
applies wheneverif you have let the pressure washer sit idle
for at least a day.
1. Placepressurewashernearan outsidewater source
capableof supplyingwater at a flow rate greaterthan
3.0 gallons per minuteand no lessthan 20 PSiat pressure
washerend of gardenhose.DO NOTsiphon supply water.
2. Checkthat high pressurehose is tightly connectedto
spray gun and pump. See"Assembling Your Pressure
Washer"for illustrations.
3. Makesure unit is in a level position.
4. Connect garden hose to water inlet on pressure washer
pump.
NOTICE
o Damageto equipmentwill resultfrom failureto followthis
instruction.
5. Turn ON water, point gun in a safe direction and squeeze
trigger to purge pump system of air and impurities.
6. Attach nozzleextension to spray gun. Tighten by hand.
7. Engagetrigger lock on spray gun trigger.
Trigger Lock
10