Operating instructions

How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Move throttle lever on engineto "Slow" position, then
"Stop" position.
Fast
Stop
J
Throttle
Lever in
STOP
position
3. ALWAYSpoint gun in a safe direction and squeezespray
gun trigger to release retained high water pressure.
INIPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
,A WARNING
,
Keep high pressure hose connectedto pump and spray gun
while system is pressurized.
ALWAYS point gun in safe direction and squeezespray gun
trigger, to releasehigh pressure, every time you stop engine.
Engagetrigger lock when not in use.
Engage trigger lock on spray gun when not in use.
How To Use the Adjustable Hozzle
You should now know howto STARTand STOPyour
pressure washer. The information in this section will tell you
how to adjust the spray pattern and to apply pressure washer
specific detergents.
A WARNING
NEVERadjustspraypatternwhenspraying.
NEVERput handsinfrontof nozzleto adjustspraypattern.
Slide nozzlebackward to achievehigh pressure. Slide
nozzleforward when you wish to adjust spray to low
pressure mode.
Point nozzledown towards a firm surface, disengage
trigger lock, and press trigger to test pattern.
12