Operating instructions

WARHIHG
NEVERoperate pressure washer without protective housing or
covers.
DO NOTwear looseclothing, jewelryor anything that may be
caught instarter or other rotating parts.
Tie up long hair and remove jewelry.
WARHIHG
Always wear safety goggles when using this equipment or in
vicinity of where equipment is in use.
Before starting the pressure washer, be sureyou are wearing
adequate safety goggles.
NEVERsubstitute safety glasses for safety goggles.
CAUTION
DO NOTsecure spray gun in open position.
DO NOTleavespray gun unattendedwhile machine is running.
NEVERusea spray gun which does not havea trigger lock or
trigger guard in place and in working order.
Always becertain spray gun, nozzlesand accessories are
correctly attached.
HOTICE
DONOTpoint spray gun at glass when in jet spray mode.
NEVERaim spray gun at plants.
If you have questions about intended use, ask dealer or contact
Sears.
NEVERoperate units with broken or missing parts, or without
protective housing or covers.
DONOT by-pass any safety device on this machine.
DONOTtamper with governed speed.
DONOToperate pressure washer above rated pressure.
DONOT modify pressure washer in any way.
Before starting pressure washer in cold weather, check all parts
of the equipment to besure ice has not formed there.
NEVERmove machine by pulling on high pressure hose. Use
handle provided on unit.
Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure
washer.
This equipment is designed to be used with Sears authorized
parts ONLY. If equipment is used with parts that DO NOT
comply with minimum specifications, user assumes all risks
and liabilities.