Operator`s manual

YourcleaningsystemrequiressomeassembIyandisready
foruseonlyafterit hasbeenproperiyservicedwiththe
recommendedoilandfuel.
Jfyou haveany prohbmswith the assembly of your
pressurewasher, please call the pressurewasher hempline
at 1o800o222o3136.
UNPACKTHEPRESSUREWASHER
1. Removeeverything from carton exceptpressure washer.
2. Opencarton completely bycutting eachcorner from top
to bottom.
3. Remove pressure washer from carton.
CARTONCONTENTS
Checkali contents, if any parts are missing or damaged,call
the pressure washer hetpline at 1=800=222=3136.
° Main Unit
* Handb with CieaningTankAssembly
, Accessory Tray
° High PressureHose
° Spray Gun
, PrecisionSprayTM Selector
, DetergentSiphoning Hose/Fiiter
* Oil Bottle
, Parts Bag (which includes the following):
. Operator's Manual
, Owner's Registration Card
, Safety Goggies
, HandieFasteningHardwareKit (whichincludes):
, Carriage Bolts (2)
, Plastic Knobs (2)
, Tree 6iips (4)
Becomefamiiiar with each piece before assembiing the
pressure washer. Identify alIcontents with the illustration on
page 6. if any parts are missing or damaged,call the
pressure washer helptine at 1-808-222-3136.
A$$EJ IBLINGCLEANINGSYSTEJ
Your Craftsmancleaning system will needassembly before
operation:
1. Fiii out and send in registration card.
2. Attach handieand accessorytray.
3. Connect detergent siphon hose to pump.
4. Add eli to engine crankcase.
5. Add fuel to fuel tank.
6. Connect pressure hose to spray gun and pump.
7. Connect water supply to pump.
8. Attach PrecisionSprayTM Selector to spray gun.
Attach Handle and Accessery Tray
1. Placehandb (A) onto handb supports (8) connectedto
main unit. Make sure holes (C) in handb align with holes
(C) on handle supports.
NOTE:it may be necessaryto move the handle supports
from side to side in order to align the handle so it wifl slide
over the handIesupports.
2. Insert carriage bolts (A) through holes from back of unit
and attacha plastic knob (8) from front of unit. Tighten
by hand.
3. Placeaccessory tray (A) over holes (g) on handle
(viewing from front of unit). Pushthe tree clips (8) into
the holes until they sit fiat againstthe accessorytray.
/
/
/
Insert supplied accessories in spacesprovided in
accessory tray. See How to UseAccessofy Tray.