Operating instructions

WARHIHG
s_ Contact with muffler result in serious
area can
burns.
f_ Exhaustheat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
* DONOTtouchhot partsandAVOIDhot exhaustgases.
* Allowequipmentto cool beforetouching.
Keepat least5feet (152cm) of clearanceonall sidesof
pressurewasherincludingoverhead.
* Codeof FederalRegulation(CFR)Title36Parks,Forests,and
PublicPropertyrequireequipmentpoweredby aninternal
combustionengineto haveasparkarrester,maintainedin
effectiveworkingorder,complyingto USDAForestservice
standard5100-1Corlater revision.Inthe Stateof Californiaa
sparkarresteris requiredundersection4442of the California
Publicresourcescode.Otherstatesmayhavesimilarlaws.
How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Move throttle to SLOW position, then STOPposition.
WARNING
f_j Backfire,fire or engine damagecould occur.
DONOTstopenginebymovingchokeleverto "Cheke"position.
3. ALWAYSpoint spray gun in a safe direction, press red
button and squeezespray gun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARHIHG
The high pressure stream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leadingto serious injury and
_ossibleamputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
. Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
* ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntrigger,to releasehighpressure,every
time youstopengine.
How to Use Accessory Tray
The unit is equipped with an accessory tray with placesto
store your QuickConnect spray tips, spray gun and spray tip
extension. There is also a hook at the front of the accessory
tray to hold your high pressure hose. Identify all accessories
with the illustration on page6.
NOTE:The extra hole in the tray is for storing a utility brush.
The extra clip in the tray is for storing a turbo spray tip. The
brush and turbo spray tip are NOTincluded with your
pressure washer. You can buy these items as optional
accessories.
1. Placespray tip extension through hole on accessory
tray, as shown.
,
3.
4.
Placespray gun through hole on accessory tray on right
side of unit.
Insert multi-colored Quick Connectspray tips in spaces
provided in accessory tray.
Hang high pressure hose on hook attachedto accessory
tray on front of tray as shown.
How to Use Spray Tips
The quick-connect on the spray tip extension allows you to
switch between four different quick connect spray tips. Spray
tips can be changed while pressure washer is running once
spray gun trigger lock is engaged. The spray tips vary the
spray pattern as shown on next page.
Followthese instructionsto changespraytips:
1. Puil backcollar on quick-connect and pull current spray
tip off. Store spray tips in holder provided on accessory
tray.
WARNING
The high pressurestream of water that this
:_ equipment produces can cut through skin and its
underlying tissues, leadingto serious injury and
)ossible amputation.
NEVERexchangeQuickConnectspraytips withoutthe trigger
lockedonthespraygun.
DONOTtwist QuickConnectspraytips whilespraying.
13