Operating instructions
_i, WARNING Use of pressure washer can create
puddles and slippery surfaces.
_' Kickback from spray gun can cause you
to fall.
• Operate pressurewasher from a stable surface.
• The cleaning areashould have adequateslopes and drainageto
reduce the possibility of a fall due to slippery surfaces.
• Be extremely careful if you must usethe pressurewasherfrom
a ladder, scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.
A, WARNING Unintentional sparking can result in fire or
_¢ electric shock.
WHENADJUSTINGOR MAKING REPAIRSTO YOURPRESSURE
WASHER
• Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFOR ENGINESPARK
• Use approved spark plug tester.
• DONOTcheckfor sparkwith spark plug removed.
A, WARNING Starter and other rotating parts can
entangle hands, hair, clothing, or accessories.
. NEVERoperatepressurewasherwithoutprotectivehousingor
covers.
. DONOTwearlooseclothing,jewelryor anythingthat maybe
caughtin thestarteror otherrotatingparts.
* Tieuplonghairandremovejewelry.
A, WARNING Risk of eyeinjury.
Spray can splash back or propel objects.
• Always wear indirect vented (chemical splash) safety goggles
marked to comply with ANSI Z87.1 when using or in vicinity of
this equipment.
• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
NOTICE High pressure spray may damage fragile items
including glass.
• DONOTpointspraygunat glasswhenusingMAXspraypattern
in selectornozzle.
= NEVERaim spray gun at plants.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
• If you have questions about intended use,ask dealer or contact
Sears.
• NEVERoperate units with broken or missing parts, or without
protective housing or covers.
• DO NOTby-pass any safety device on this machine.
• DONOTtamper with governed speed.
• DONOToperate pressure washer above rated pressure.
• DONOTmodify pressure washer in any way.
• Before starting pressure washer in cold weather, check all parts
of the equipment to besure ice has not formed there.
• NEVERmove machine by pulling on hoses. Use handle provided
on unit.
• Check fuel system for leaksor signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure washer.
• This equipment is designedto be used with Searsauthorized parts
ONLY.If equipment is used with parts that DONOTcomply with
minimum specifications, user assumesall risks and liabilities.