Operators lVlanuat i i _i: .... _ ' .......................... _"_"_'_ ........ (RRFTSMRII ° 6.75 Horsepower 2200 PSi 2.2 GPM WAS Model No. 580.762201 HOURS: Mon. - Fri. 8 a.m. to 5 p.m. (CST) • Safety ® Assembly Operation = Maintenance = Parts CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffrnan Estates, Visit our Craftsman website: www.sears.
SAFETY RULES ........................ 2-3 STO RAG E ............................. 15 ASSEMBLY ............................ 4-5 TROUBLESHOOTING .................... 16 OP ERATION .......................... 6-10 ................ 18-27 MAINTENANCE LIMITED ...................... REPLACEMENT 11-! 3 ONE YEAR WARRANTY PARTS HOW TO ORDER PARTS ..................
Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. The harmful elements may cause property damage or severe injury. Do not allow CHILDREN Washer at any time. Always be certain the spray gun, nozzles and accessories are correctly attached. Never use a spray gun which does not have a trigger lock or trigger guard in place and in working order.
CARTON CONTENTS The following parts are shipped loose with your pressure washer: • Main Unit -- pressure washer with wheels, guide handle. o High Pressure Hose o Parts Box #1 (which includes items listed below) • Rotating Brush , Vehicle/Boat Wash o HOW TO SET UP YOUR PRESSURE WASHER For the most part, your Craftsman High Pressure Washer has been assembled at the factory. You must, however, attach the wire form, assemble the spray gun, and attach the high pressure hose to the pump and spray gun.
Placeassembled spraygunonholder. ® Placeturbonozzlein grommetholeinbase. Cutthetiewrapsonthehighpressurehoseand connecthighpressurehosetogun.Tightenby hand. Removeplasticcapandconnecthighpressure hoseto pump.Tightenby hand, CHECKLIST Before you operate your new high pressure washer please review the following checklist: AttachHigh Pressure hosehere o All assembly instructions have been completed. = The high pressure hose connections to the spray gun and to the pump are tight and secure.
KNOW YOUR HIGH PRESSURE WASHER Read this owner's manual and safety rules before operating your high pressure washer, Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
HOW TO USE YOUR PRESSURE WASHER IF YOU HAVE ANY PROBLEMS operating your pressure washer, please call the pressure washer helpline at 1-800-222-3136. HOW TO USE THE ADJUSTABLE NOZZLE A DANGERI NEVER adjust spray pattern when spraying. NEVER put hands in front of spray nozzle to adjust spray pattern. You could be injured, One of the nozzles you can attach to the nozzle extension is the adjustable nozzle.
RiNSiNG WiTH THE PRESSURE WASHER WARNING Be extremely careful if you must use the pressure washer from ladder, scaffolding or any other relatively unstable location. Pressure in a running washer builds in the wand as you climb. When you press the trigger, the recoil from the initial spray could force you to fall, or if you are too close to the cleaning surface, high pressure could force you off a climbing apparatus.
BEFORE STARTLING THE PRESSURE WASHER TO START OiL Use only high quality detergent oil rated with AP! service classification SF or SG rated SAE 30 weight. Use no special additives. o Place pressure washer on a level surface o Clean area around oil fill and remove oil dipstick. ,, Wipe dipstick clean. WASHER You have assembled your high pressure washer and have prepared the engine for starting. You are now ready to clean your car, boat or whatever you plan to clean.
IMPORTANT: Do not run pump without the water supply connected and turned on. You must follow this caution or the pump wil! be damaged. • Move the Throttle Control Lever to the 'Fast' position • Push primer bulb 3 times. Wait about two 2 seconds between each push. In cold weather, (55°F/13°C or below) push 5 times. HOW TO STOP YOUR WASHER Note: Do not use primer to restart a warm engine after a short shut down.
CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE PRESSURE HOURLY OPERATING Before Each Use TASK t Hours or Every 25 Yearly SERVICE DATES Hours or Every t00 Yearly WASHER CheckJclean water inlet screen on quick-connect. xt Check high pressure hose. x Check detergent hose, x Check spray gun and assembly for leaks. x Purge pump of air and contaminants. x ....... ,,,, ,,_,,,,,, ......... ,,• , ,, ENGINE x Check oiI tevel.
BEFORE o ,, . • Check Check Check Check Purge Check EACH USE ENGINE water inlet screen for damage. high pressure hose for leaks. detergent inlet hose and filter for damage. gun and wand assembly for leaks. pump of air and contaminants. engine oil level. PRESSURE WASHER CHECKING CHANGING Change oil while engine is still warm from running, as follows: Check High Pressure Hose: High pressure hose can develop leaks from wear, kinking, abuse. Inspect hose each time before using it.
Turn cover to the left (counterclockwise) and remove it and filter from flange. Discard filter. o Clean cover and flange thoroughly. Shut off the engine and turn off the water supply. ® Separate the nozzle from the nozzle extension. ® Rotate to stream setting. Insert new filter into cover. o Remove orifice from the end of the nozzle using the allen wrench included with the kit or a 2mm or 5/64 allen wrench.
O-RING MAINTENANCE 1 O-Ring (p/n B2386) for the outside of the Male Quick-Connect. Through the normal operation of your pressure washer, O-Rings, which keep the connections of the hoses and gun tight and leak-free may become worn or damaged. Provided with your pressure washer is an O-Ring Maintenance Kit which provides replacement O-Rings, Rubber Washer and Quick Connect filter, O Parts in the O-Ring Kit Include: o 2 O-Rings extension.
AFTER EACH USE To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Follow these instructions: Water should not remain in the unit for long periods of time. Sediments of minerals can deposit on pump parts and ffreeze" pump action. Follow these procedures after every use: PROTECT FUEL SYSTEM Remove all gasoline from the fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine.
PROBLEM Pump has followingproblems: CAUSE CORRECTION 1. Nozztein towpressuremode. 1. Pullnozzle backwardfor high failureto producepressure,or erraticpressure,chattering,toss of 2. Waterinlet is blocked. 2. pressuremode. Clear inlet pressure,Iowwater volume. & Inadequatewater supply 3. Provide adequatewaterflow at least 2.2 4. Inlet hoseis kinked or leaking 4. Straighteninlethose, patchleak. 5. Cloggedwaterinlet screen. 5, Replace/ clean waterinlet screen, 6. 7. 8.
CRAFTSMAN Tecumseh 2200 PS! HIGH PRESSURE 4-Cycle Engine WASHER 580.762201 143.988714 390 900 jb 370A 300 260 298,,_ 400 130A _'/"130 9O 20 _"-292 101 205 2O4 266 266A.
CRAFTSMAN Tecumseh Item 2200 PSn HiGH PRESSURE 4_CycRe Engine WASHER 580,762201 143=986714 Part# Description Qty. 1 2 6 7 36835A 26727 33734 36557 1 2 1 12 12A 32447 36558 12B 14 15 t6 17 18 36694 28277 30589 34839A 3t335 651018 19 20 30 40 36281 32600 37208 35544A 40 35545A 40 35546 41 41 35541 35542 41 35543 42 42 42 43 45 35547A 35548A 35549 20381 32B75A 46 48 50 52 32610A 35616 37011 29914 Cylinder (Incl. 2 &. 20) Dowel Pin Breather Element Breather Ass'y. (inc!.
CRAFTSMAN Tecumseh Item 2200 PSI HRGH PRESSURE 4-Cycle Part# t55 157 15B 159 160 161 35624A 650914 36629 35626 35718 30063 178 29752 182 184 185 t86 187 200 30088A 26756 36579 34337 36580 35727 202 203 204 36482 31342 651029 205 651019 207 209 215 223 224 238 239 241 245 250 260 261 34336 30200 32410 651044 36581 650932 34338 36919 36905 36920 37180 30063 Engine WASHER 580.762201 143.
CRAFTSMAN Tecumseh 2200 PSi HiGH PRESSURE 4-CycRe Engine WASHER 580.762201 143°986714 F0- 40 Item Part# Description 0 640147 1 631615 2 4 5 6 7 16 17 631767 631184 631 !83 640070 650506 631807 651025 Carburetor ncl.
CRAFTSMAN Tecumseh 2200 PSi HiGH PRESSURE 4-Cycle WASHER 580.762201 Engine 143.986714 ]2 ]3 f f \ t Item 0 3 6 7 8 11 12 13 14 Part# Description 590739 590740 590616 590617 590618A 59063B 590535 590701 590741 Rewind Starter Retainer Starter Dog Dog Spring . , Pulley k Rewind Spr!n.q Ass y Starter Housing Ass y_(40 degreegrommet) Starter Rope (Eengti_ 98" x 9(64" clia.) Starter Handle Locking Tab Qty.
CRAFTSMAN 220G PSti HiGH PRESSURE WASHER 580.
CRAFTSMAN rt%M t 2 3 4 5 6 7 8 9 10 11 12 13 14 t5 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PART NO. EB2528 NSP NSP EB2534 39414 52858 39287 27007 B2142 75402 B2168 B1460 B1779 B2347 46476 51767 52857 92235 B1631A B2623 B2626 91373 79552 96307 AI040B A1041 A1408 B1232 B1288 21782 21781 50190 48031 2200 PSi HiGH PRESSURE ! t 1 1 3 5 2 2 2 2 1 3 2 2 2 2 2 1 1 1 1 1 ! 1 1 1 1 1 1 ! 1 2 t WASHER DESCRilPTION BASE, VSPW ENGINE, Tecumseh OHV &75HP, 143.
CRAFTSMAN 2200 PS_ HiGH PRESSURE WASHER 25 580.
CRAFTSMAN 2200 PSi HIGH PRESSURE item Part# Qty.
For the repair or replacement parts you need delivered directly to your home Call 7 a.m. - 7 p.m., 7 days a week 1--800-366-PART (1-800=366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1=800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day, 7 days a week 1=800=488=1 For information on purchasing a Sears Maintenance Agreement or to inquire about an existing agreement Call 9 a.m.- 5 p.m.
