#E/ARSOwner's Manual CRAFTSMAN° 4.5 HORSEPOWER 1800 PSI 2 GPM HIGH PRESSURE WASHER Model No. 580.761800 CAUTION: _L PRESSURE WASHER j CUSTOMER Before using this _> product, read this manual and follow all Safe_..Rules and Operating Instructions. HOURS: SEARS, ROEBUCK _t No.B,8,8D_0 (i_/_n) Mon.- HELPLINE Fri. 8 a.m. to 5 p.m. (CST) and CO., Hoffman Estates, IL 60179 U.S.A.
SAFETY RULES ............................ STORAGE 3 ............................... 14 ASSEMBLY .............................. 4-5 TROUBLESHOOTING ........................ 15 OPERATION ..... 6-9 REPLACEMENT PARTS .................. 16-27 MAINTENANCE i ....................... LIMITED ........................ HOW TO ORDER PARTS ............
CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PLACE WIRE WHERE IT CANNOT CONTACT SPARK PLUG,TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP, TRANSPORTING, ADJUSTING OR MAKING REPAIRS TO YOUR HIGH PRESSURE WASHER. A • -_ read this manual and follow all Safety AUTION: Before using this product, Rules and Operating Instructions. Never allow any part of the bodyto come in contact with the fluid stream. DO NOT come in contactwith a fluid stream createdby a leak in the high pressurehose.
CARTON CONTENTS HOW TO SET UP YOUR The following parts are shippedloose with your pressure washer:. * • Manual Bag (which includesthe items listed below) • Ov_er's Manual * Nozzle Cleaner Kit • Parts Box (which includes items listed below) • Spray Gun • Wand Extensionwith Hi/Lo Adjustable Nozzle. • Wire Form • Motor Oil • WASHER Forthe most part, yourCraftsman High PressureWasher has been assembledatthe faclonj.
• Cut the tie wraps on the high pressurehose and connect high pressure hose to gun. Tightenby hand. • Remove plastic cap and connect high pressure hose to pump. Tighten by hand. • Place assembled spray gun on holder. CHECKLIST __ _ Before you operate your new high pressure washer _ please review the following checklist: high pressure hose connections to the spray _ The All assembly instructionshave been completed. gun and to the pump are tight and secure.
KNOW YOUR HIGH PRESSURE WASHER Read this owner's manual and safety rules before operating your high pressure washer. Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controlsand adjustments. Save this manual for future reference.
HOW TO USE YOUR PRESSURE WASHER IF YOU HAVE ANY PROBLEMS operating your pressure washer, please call the pressure washer helpline at 1-800-222-3136. A WARNING NEVER adjust spray pattern when spraying. NEVER put hands in front of spray nozzle to adjust spray pattern. You could be injured. HOW TO USE THE-ADJUSTABLE NOZZLE On the end of your spray gun is a nozzle that you can slide forward and backward and that you can also twist from side to side.
RINSING WITH THE PRESSURE WASHER A WARNING Be extremely careful if you must use the pressure washer from ladder, scaffolding or any other relatively unstable location. Pressure in a running washer builds in the wand as you climb. When you press the trigger, the recoil from the initial spray could force you to fall, or if you are too close to the cleaning surface, high pressure could force you off a climbing apparatus.
TO START YOUR PRESSURE WASHER • You have assembled your high pressurewasher and have prepared the engine for starting.You are now ready to clean your car, boat or whatever you plan to dean. Set Choke Lever to "Choke" multi-positionchoke. position.Note: This is a . Place the pressure washer in an area close enough to an outside water source that can flow at a rate of at least 2 gallons per minute. Connect a garden hose to the water spout. / Check that the.
CUSTOMER MAINTENANCE SCHEDULE RLL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE TASK RESPONSIBILITIES HOURLY OPERATING INTERVAL BeforeEach Use Every 25 Hours or Yearly SERVICE DATES Every 100 Hours or Yearly PRESSURE WASHER Check/clean water inlet screen on quick-connect. Xt Check high pressure hose. X Check detergent hose. X Check spray gun and assembly for leaks. X Purge pump of air and contaminants. X ENGINE Check oil level. X Change engine oil. X* Service air cleaner.
BEFORE • • • • • • EACH USE ENGINE MAINTENANCE Check water inlet screen for damage. Check high pressure hose for leaks. Check detergent inlet hose and filter for damage. Check gun and wand assembly for leaks. Purge pump of air and contaminants. Check engine oil level. PRESSURE WASHER MAINTENANCE Check and Clean Inlet Screen: Remove quick-connect and examine inlet screen on the female connector, Clean if it is clogged or replace if it is torn.
CLEAN/REPLACE SPARK PLUG A from spark plug and keep wire away from AUTION: spark plug. Disconnect spark plug wire • I Remove nozzle from the end of the wand using the allen wrench included with the kit or a 2mm or 5/64 allen wrench. \ Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better. Replace with champion J-19LM or equivalenttype spark plug. Set the spark plug gap to 0.030 inch (0.76mm).
O-RING 1 O-Ring (p/n B2386) for the outside of the Male Quick-Connect. MAINTENANCE Through the normal operation of your pressure washer, O-Rin_, which keep the connections of the hoses and gun tight and leak-free may become worn or damaged. Provided with your pressurewasher is an O-Ring Maintenance Kit which provides replacement O-Rings, Rubber Washer and Quick Connect filter.
It is importantto prevent gum deposits from forming in essential fuel system parts such as the carburetor,fuel filter, fuel hose or tank during storage. Also, experience indicates that alcohol-blendedfuels (called gasohol, ethanol or methanol) can attract moisture which leads to . separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. AFTER EACH USE Water shouldnot remainin the unitfor longperiodsof time.
CAUSE PROBLEM Pumphasfollowingproblems: failure to producepressure,or erraticpressure,chattering,lossof pressure,lowwatervolume. Detergentfailstomixwith. spray. CORRECTION 1. Nozzlein lowpressuremode. 2. Water inletis blocked. 3. Inadequatewatersupply 1. Pullnozzlebackwardfor high pressuremode. 2. Clearinlet 4. Inlet hose is kinked or leaking 5. Clogged water inlet screen. 3. Provideadequatewaterflow at least2 gpm. 4. Straighteninlethose,patchleak. 5. Replace/ cleanwaterinletscreen. 6. 7.
CRAFTSMAN 1800 PSI HIGH PRESSURE BRIGGS & STRATTON 4-CYCLE WASHER 580,761800 ENGINE 12F802-2407-E1 615 O 230 616 592 584 _ 307 116A _ 3O6 337 635 3o78 11058 OWNER'S MANUAL REF. NO. 1 2 3 PART NO. DESCRIPTION REF. NO. 493260 Cylinder Aseambly 293708 Bushing ,299819 Seai-Oil 227 230 284 492349 Lever-Governor 67072 Washer 94511 Sorew.-Shoulder 306 307 224324 Shield-Cylinder 94515 Scmw-Hex.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.761800 BRIGGS & STRATTON 258 4-CYCLE ENGINE 12F802-2407-E1 27 o 4° )4o 34 33_ 24 27 741 146, REF. NO. PART NO. DESCRIPTION 16 24 25 498571 Crankshaft 222698 Key-Flywheel 499429 Piston Assembly 2s (Standard) 499429R_gSet (Standard) 27 263190 Lock-Piston Pin REF. NO. 28 PART NO. DESCRIPTION 29 Pin-Piston (Standard) 499424 Rod--Connecting 32 33 94699 Screw.-Hex. 262651 Valve-Exhaust RER NO. 499423 (Standard) '.
CRAFTSMAN 1800 PSl HIGH PRESSURE BRIGGS & STRATTON WASHER580.761800 4-CYCLE ENGINE 12F802-2407-E1 46 RER NO. PART NO. DESCRIPTION REF. NO. 4 12 493279 .272198 Sump-Engine Gasket-Crankcase 20 22 15 94720 PART NO. .399781 94220 DESCRIPTION REF. NO. Seal-Oil Screw-Hex_ 43 46 PART NO. 493737 498275 DESCRIPTION Govemor/Oil Slinger Gear-Cam Plug-Oil Drain . Included in Gasket Set--Part Number 497316. • Induded in Carburetor Kit-Part Number 498260. 4.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER BRIGGS & STRA'I'FON 580.761800 4-CYCLE ENGINE 12F802-2407-E1 ! I 124 I 634_) 634_ ,08 ! I 3 J 137_ 11o I 617 110_ ICHOKE SYSTEM I' REF. NO. 94 95 98 104 108 PART NO. e493765 94098 398185 e231371 223471 110 eo 117 498978 REF. NO.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.761800 BRIGGS & STRATTON 4-CYCLE ENGINE 12F802-2407-E1 843 621 265 670 REF. NO. 65 181 187 PART NO. REF. NO. DESCRIPTION PART NO. DESCRIPTION 94696 397974 298049 Screw-Phillips Cap-Fuel Tank Une.--Fuel 265 267 284 213146 94694 94511 Clamp-Casing Screw-Slotted Hex. Screw-Shoulder 333 334 802574 94731 Armature-Magneto Screw-Hex. 188 188A 202 94644 398540 262579 (Cut To Required Length) Screw-Hex. Screw-Shoulder Link-Mechanical Gov.
CRAFTSMAN 1800 PSI HIGH PRESSURE BRIGGS & STRATTON WASHER 580.761800 4-CYCLE ENGINE 12F802-2407-E1 971 16. f 967 968 971A_ 332_ 455 30 23 11036 LABEL KIT-EMISSION REF. NO. PART NO. DESCRIPTION 23 492893 37 224511 81 223664 161 496116 163.e.272693 300 496106 Flywheel Guard-Fill Lock-Muffler Screw Base-Air Cleaner Gasket-Air Cleaner Muffler-Exhaust 304 305 Housing-Blower Screw-Hex. 493294 94744 RER NO. I PART NO.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.761800 BRIGGS & STRATrON 4-CYCLE ENGINE 12F802-2407-E1 65A 55 373 _) i 4o9 I i I I I 6O I 689 _=_ ! • • RER NO. PART NO. 55 497440 Housing-Rewind Starter 60 65A 281434 94686 Gdp-Starter Screw-Hex. 58 280399 Rope-Starter (Cut To Required Length) 144 373 498144 92987 Pulley-Rope Start Nut-Hex. 456 281503 Retainer-Spring DESCRIPTION RER NO. PART NO. DESCRIPTION Included in Gasket Set--Part Number 497316.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.761800 BRIGGS & STRAI-FON 4-CYCLE ENGINE 12F802-2407-E1 358 GASKET SET 670 7 9 116A 1095 VALVE OVERHAUL GASKET SET 3_) 20_ 121 CARBURETOR 977 CARBURETOR GASKET SET 941 i _,li 104_ V [ 163_ RER NO. 3 PART NO. .299819 7 _D272916 9 ._272481 12 .272198 20 ,399781 51 .272198 94 e493765 104 e231371 110e4, 116 116A *280393 .280966 PART NO.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.
CRAFTSMAN 1800 PSI HIGH PRESSURE ITEM PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 "_ 32 33 34 35 36 37 38 39 40 41' 42 43 44 21416D B2200 96307 B1793D 97998 97769 20441 B1819 81895 B1024D 30809 B1786 97741 21206 75402 52858 A1408 21782 21781 87841 39414 B1735 B1880 A1040B A1041 B1820 98300 B1797 48031G B1262A 97100 91373 79552 B2157D 97178 9936a 97082 97912 B1969 97566 98317B 98541 B1459 21208 WASHER 580,761800 DESCRIPTION. QTY.
CRAFTSMAN 1800 PSI HIGH PRESSURE WASHER 580.
CRAFTSMAN 1800 PSI MAQUINA LAVADORA DE ALTA PRESION 580.
f Sears se complace en ofrecer a sus clientes servicio de reparaci6n de aparatos electro-domdsticos y electr6nicos de todas las marcas. En Sears, usted puede contar con operadores en espafiol, a los que puede Ilamar sin cargo alguno. Para pedir servicio de reparaci6n a domicilio, Llamme 24 horasaldfa.