Operating instructions

• Cut the tie wraps on the high pressurehose and

connect highpressurehose to gun. Tightenby

hand.

• Place assembledspray gun on holder.

CHECKLIST

• Remove plastic cap and connecthighpressure

hose to pump. Tighten by hand. Before you operate your new high pressurewasher

__ _ _ please review the following checklist:

_/ _ All assembly instructionshave been completed.

The high pressure hose connections to the spray

'-- gun and to the pump are tight and secure.

b _ _ While learning how to use your high pressure

1 (_ washer, pay extra attentionto the following important

items:

• Attach nozzle extensionto spray gun.

• Engine oil is at proper level

Important: Any attempt to crank or start the engine

before it has been properly serviced withthe recom-

mended oil may result in an engine failure. See Page

8 for instructionson adding oil and proper oil specifi-

cations.

Important: The water supplyto your pressure wash-

er must be connected and tumed on priorto starting

your engine.

• Be sure gas tank is filled properlywith clean,

fresh, unleaded gasoline.

• Become familiar with all controls- their location

and function. Operate those controlsbefore start-

ing the engine.