Manual

• SelectcyanjetflushPrecisionSprayTM nozzlefor
quick high flow clean up and long reach cleaning of
second story siding and windows.
• Select magentajet soap PrecisionSprayTM nozzleto
launch soap to second story siding and windows.
Select black fan soap PrecisionSprayTM nozzlefor
generalcleaning. Greatfor applying soap to
vehicles, boats, driveways, decks,and patios.
FAN SOAP
3. Pull backon collar,insert new PrecisionSprayTM nozzle
and releasecollar.Tug on nozzleto makesure it is securely
in place.
UsageTips
* For most effective cleaning, keep PrecisionSprayTM nozzle
from 8 to 24 inches (20 to 61 cm) awayfrom cleaning
surface.
. If you get PrecisionSprayTM nozzletoo close, especially
using a high pressure nozzle,you may damage surface
being cleaned.
* DO NOTget closer than 6 inches (15 cm) when cleaning
tires.
2-1N-1 Soap System
CAUTIOH
Chemicalscan cause bodily injury, and/or property
damage.
NEVERusecausticliquidwith pressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.
CJeaningand ApplyingDetergent with the Project Pro@
PerfectMJxTM Siphon
To apply undiluted detergent using the
blue PeffectMixTM siphon, follow these
steps:
1. Review use of PrecisionSprayTM
nozzles.
2. Attach PerfectMWMsiphon hose to
pump and PeffectMixTM concentrate i','
bottle, ti
NOTICE
Contact with the hot muffler can damage detergent
siphoning tube.
Wheninsertingthe siphoninto a detergentsolutionbottle,
routethetubeso asto keepit from inadvertentlycontactingthe
hot muffler.
3. Makesure fan soap (black) or jet soap nozzle(magenta)
is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles (Cyan,Orangeor Red).
4. Makesure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
NOTICE
You must attach all hosesbefore you start th_
Startingthe enginewithout allthe hosesconnectedandwithout
thewaterturnedONwill damagethe pump.
Damageto equipmentresultingfrom failureto followthis
instructionwill void warranty.
5. Start engine following instructions How to Start Your
Pressure Washer.
6. Apply detergentto a dry surface, starting at lower
portion of areato be washed and work upward, using
long, even, overlapping strokes.
7. Allow detergentto "soak in" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surface from drying. DO NOTallow detergent to dry on
(prevents streaking).
14