Manual
How to Use Accessory Tray
The unit is equipped with an accessory tray with
pressure hose and selector nozzle.
1. Place spray gun in wide groove on accessory tray
on accessory tray.
3. Insert selector nozzle in hole provided on front of
accessory tray.
4. Place one end of high pressure hose in groove at
top of accessory tray and wrap high pressure hose
around hooks as shown.
How to Use Selector Nozzle
changed while pressure washer is running once spray
gun trigger safety lock is engaged. The spray patterns
Follow these instructions to change nozzle
patterns:
• MAX
such as second story surfaces, paint removal,
• GENERAL - For most all purpose cleaning
• DELICATE - For gentle cleaning of cars/trucks,
etc..
• FLUSH
long reach cleaning of second story siding and
windows.
• SOAP - For general soap applications or
to launch soap to second story siding and
windows.
up.
3. Turn dial until desired spray pattern lines up with
4. Push dial in until it locks into place.
Usage Tips
from 8 to 24 inches (20 to 61 cm) away from
cleaning surface.
• If you get selector nozzle too close, especially using
a high pressure spray pattern nozzle, you may
• DO NOT get closer than 6 inches (15 cm) when
cleaning tires.
14
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
amputation.
• NEVER change spray patterns without the trigger locked
on the spray gun.
• DO NOT twist selector nozzle while spraying.
3000 PSI
2.4 GPM
2600 PSI
2.6 GPM
2500 PSI
2.7 GPM