Manual

SPECIFICATIONS
ENGINE TECHNICAL INFORMATION
This is a single cylinder, overhead valve (OHV), air
cooled engine. In the State of California, Model 120000

Board to meet emissions standards for 125 hours.

or operator of this engine any additional warranties with
respect to the performance or operational life of this
engine. The engine is warranted solely according to the
product and emissions warranties stated elsewhere in
this manual.
Power Ratings
The gross power rating for individual gasoline engine


Power & Torque Rating Procedure, and is rated in

at 2600 RPM for those engines with “rpm” called out

values are derived at 3600 RPM. The gross power


air cleaner installed whereas gross power values are
collected without these attachments. Actual gross



wide array of products on which engines are placed,
the gasoline engine may not develop the rated gross
power when used in a given piece of power equipment.




conditions (temperature, humidity, altitude), and


engine of higher rated power for this engine.
PRODUCT SPECIFICATIONS
Pressure Washer Specications
...........3000 PSI*@2.4 GPM
 ...............2500 PSI@2.7 GPM*
 ....................Use as directed
Water Supply Temperature......
Engine Specications
Bore ......................... 2.688 in. (68.28 mm)
Stroke ........................ 2.040 in. (51.82 mm)
Displacement .....................
Spark Plug
 ..................

 ................ 0.020 inch (0.051 mm)
 ...... 0.010-0.014 in.(0.25-0.36mm)
Valve clearance with valve springs installed and piston
1/4 in. (6 mm) past top dead center (check when engine
is cold).
Intake ................ 0.004-0.008 in.(0.10-0.20 mm)
 ............... 0.004-0.008 in.(0.10-0.20 mm)
Fuel Capacity ...........................
Oil Capacity ................... 20 Ounces (0.6 liter)
NOTICE For practical operation, the engine load



(25° C). It should operate satisfactorily at an angle up
to 15°.
* This pressure washer is rated in accordance to
the Pressure Washer Manufacturers Association
(PWMA) standard PW101-2010 (Testing and Rating
Performance of Pressure Washers).
16