Owner`s manual

BATTERY VOLTAGE TEST

CAUTION: Do not measure batteries while they are installed

in the devices they are powering. The batteries must be

removed from installations before tests can be made.

1. Set the function switch to the

1.5V or 9V BAT switch position.

Use the 1.5V position for ‘AAA’,

‘AA’, ‘C’, ‘D’, and other 1.5V

batteries. Use the 9V position

for square 9V transistor

batteries.

2. Insert the black test lead

banana plug into the negative

COM jack.

Insert the red test lead banana

plug into the positive V jack.

3. Touch the black test probe tip

to the negative side of the

battery. Touch the red test

probe tip to the positive side of

the battery.

4. Read the voltage in the display.