Owner`s manual

8
SPECIFICATIONS
Diode Test Test current of 0.3mA maximum, open circuit
voltage 1.5V DC typical
Continuity Check Audible signal will sound if the resistance is
less than approximately 30!, test current
<0.7mA
Temperature sensor Requires type K thermocouple
Input Impedance 7.5M! (VDC and VAC)
Display 4000 count LCD
Overrange indication “OL” is displayed
Polarity Automatic (no indication for positive polarity);
Minus (-) sign for negative polarity.
Measurement Rate 2 times per second, nominal
Auto Power Off Meter automatically shuts down after 15
minutes of inactivity
Low Battery Indication “BAT” is displayed if battery voltage drops
below operating voltage
Batteries Requires two AAA batteries (sold separately)
Fuses mA, µA ranges, 0.5A/250V fast blow
10A range, 10A/250V fast blow
Operating Temperature 32
o
F to 122
o
F (0
o
C to 50
o
C)
Storage Temperature -4
o
F to 140
o
F (-20
o
C to 60
o
C)
Relative Humidity <70% operating, <80% storage
Operating Altitude 2000 meters (7000ft.) maximum.
Weight 9.17 oz. (260g).
Size 4.78” x 2.38” x 1.57” (121.5mm x 60.6mm x
40mm)
Safety For indoor use and in accordance with
Overvoltage Category II, Pollution Degree 2.
Category II includes local level, appliance,
portable equipment, etc., with transient
overvoltages less than Overvoltage Category
III.