Owner`s manual

5. Connect liftharness to electric actuator.
a. Connect male connector of harness to female
connector of electric actuator.
6. Viewing lift switch from under hood connect lift
harness to lift switch.
a. Connect yellow wire of lift harness to lower right
terminal of lift switch.
b. Connect double red wire of lift harness to lower
left terminal of lift switch.
c. Connect single red wire to upper right terminal.
7. Secure wiring harness.
a. Loosely attach wire tie around pivot rod support
and wiring harness.
b. Ensure wire routing does not allow wires to rest
on sharp edges or near moving parts.
c. Tighten wire tie.
8. Raise hood, insert female connector of lift harness
into male connector of tractor harness.
9. Ensure wire routing does not allow wires to rest on
sharp edges or near moving parts.
PIVOT ROD
WIRE TIE
ACTUATOR
WIRING
HARNESS
FIG. 17
LIFT
HARNESS
BLACK
(GROUND)
WIRE
(TOP)
LOWER
TERMINALS
LIFT
VIEWED FROM
BEHIND DASH
SINGLE
RED WIRE
FEMALE CONNECTOR
:i_il_. (LIFT HARNESS)
i_;_ _j MALE CONNECTOR
_ (TRACTOR HARNESS)
I _DASH
_'_ (CUT AWAY)
0 0
VIEW FROM
LEFT SIDE OF
TRACTOR
FIG. 18
DOUBLE
RED Wl
FIG. 16
YELLOW
DRILL TEMPLATE
PLACE OVER HEIGHT OF CUT
SYMBOL ON DASH AND DRILL
1/2" DIA. HOLE.
11