Owner`s manual

CONTAINER ASSEMBLY (See Fig. 3)
1. Place bottom half inside of top half, as shown.
2. Place one foot inside bottom half and lift top half to
meet bottom half.
3. Press halves tightly together while lifting top to lock
into place as shown.
IMPORTANT: BEFORE LOCKING THETABS, HOOKED EDGES
ON BOTH HALVES MUST OVERLAP TO FORM SEAL AS
SHOWN IN INSET.
4, Repeat for other containers,
CONTAINER
BOTTOM HALF
CONTAINER
TOP HALF
CONTAINER
TOP HALF_
PRESS TOGETHER
TO FORM SEAL
WHILE LIFTING
TOP HALF
CONTAINER
BOTTOM
HALF
LOCKING
TAB
FiG. 3
ASSEMBLY CHECK: Squeeze sides of lower half of con-
tainer and check that there is no gap between upper and
lower halves, If a gap appears, unlock tabs to separate
container halves and repeat instructions above,