Owner`s manual

TO REPLACE FUSE

Replace with 30 amp automotive-type ptug-in fuse. The

fuss holder is located in the engine compartment, directly

in front of the dash

TO REPLACE HEADLIGHT BULB

• Raise hood

• Pull bulb holder out of the hole in the backside of the

grill.

• Replace bulb in holder and push bulb holder securely

back into the hole in the backside of the grill.

• Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run

poorly, stop running or prevent it from starting,

• Check wiring. See electrical wiring diagram in Repair

Parts section of this manual.

TO REMOVE HOOD AND GRILL (See Fig. 27)

• Raise hood.

• Unsnap headlight wire connector°

• Stand in front of tractor, Grasp hood at sides, tilt

forward and lift off of tractor.

• To reinstall, slide hood pivot brackets into slots in

frame_

• Reconnect headlight wire connector and close hood.

HOOD

HEADLIGHT

WIRE

CONNECTOR

FIG. 27

Downloaded from www.Manualslib.com manuals search engine