Owner's Manual

illlUlllllllllllllll i IIIIILIIIIIIIIllLIIIII Illllll ,I X X .......................................
SERVICE AND ADJUSTMENTS
TO ADJUST ATTACHMENT LIFT SPRING
(See Fig. 36)
• While holdingspring bushing withwrench, loosen jam
nut.
• Turn adjustment bolt clockwise to extend spring and
reduce tift effort for heavier attachments.
• Turn adjustment bolt counterclockwise for lighter at-
tachments.
° Retighten jam nut against spring bushing.
IMPORTANT: DO NOTADJUST FOR MAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS SUCH
AS A MOWER° ADJUST LIFT LEVER SPRING TO AID IN
LIFTING ATTACHMENT. DO NOTOVERPOWER SPRING.
WHEN REMOVING ATTACHMENT, ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION.
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 37)
° Raise hood.
° Unsnap headlight wire connector_
• Stand infront oftractor. Grasp hoodatsides, tilttoward
engine and lift off oftractor.
, To replace, reverse above procedures.
ADJUSTMENT
BOLT
SPRING BUSHING
JAM NUT
o
ATTACHMENT
LIFT SPRING
f
FIG. 36
HOOD
WIRE
CONNECTION
FIG. 37
24