Specifications

SEIRVmCEAND ADJUSTMENTS
,,r,, ..........................
,, i i i '
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
o Depress clutchtbrake pedal fully and set parking brake.
o Place motion control lever in neutral (N) position.
o Place attachment clutch in "DISENGAGED" position.
° Turn ignition key "OFF" and remove key.
o Make sure the blades and all moving parts have completely stopped.
o Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plugo
ii, li i,i ,im ,111i, i i
TRACTOR
TO REMOVE MOWER (See Fig. 18)
Mowerwilt be easier to remove from the right side of tractor
° Place attachment clutch in "DISENGAGED" position.
, Move attachment lift lever forward to lower mower to its
lowest position_
o Roll belt off engine pulley.
o Disconnect clutch rod from clutch lever by removing
retainer spring_
° Disconnect anti-sway bar from chassis bracket by
removing retainer spring
o Disconnect suspension arms from rear deck brackets
by removing retainer springs°
. Disconnect front links flora deck by removing retainer
springs°
o Raise lift lever to raise suspension arms, Slide mower
out from under tractor,
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER iS TO BE MOUNTED TO THE TRACTOR,
REMOVE THE FRONT LINKS,
TO INSTALL MOWER (See Fig. 18)
, Raise attachment lift lever to its highest position,
° Slide mower under tractor with discharge guard to right
side of tractor.
. Lower lift lever to its lowest position,,
. Install mower in reverse order of removal instructions.
SUSPENSION
SPRING
ENGINE
PULLEY
RETAINER
SPRING
ANTI-SWAY BAR
RETAINER
SPRINGS
(BOTH SIDES)
FIG. 18
20