User Manual

ASSEMBLE GAUGE WHEELS TO
MOWER DECK
The gauge wheels are designed to keep
the mower deck in proper position when
operating mower. Be sure they are proper
ly adjusted to ensure optimum mower per
formance.
« Assemble gauge wheels with tractor on
a flat level surface.
® Adjust mower to desired cutting height
(See ‘TO ADJUST MOWER CUTTING
HEIGHT’ in the Operation section of this
manual).
® With mower in desired height of cut po
sition, gauge wheels should be assem
bled so they are slightly off the ground.
Install gauge wheel in appropriate hole
with shoulder bolt, 3/8 washer, and 3/8-
16 locknut and tighten securely,
e Repeat for opposite side installing
gauge wheel in same adjustment hoie.
Gauge Wheel
^/CHECKLIST
Please review the following checklist:
/ All assembly instructions have been
completed.
No remaining loose parts in carton.
/ Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps),
/ Seat is adjusted comfortably and tight
ened securely,
/ Ail tires are properly inflated. (For ship
ping purposes, the tires were overinfiat-
ed at the factory).
/ Be sure mower deck is properly leveled
side-tO"Side/front-to-r#ar for best cutting
results. (Tires must be properly inflated
for leveling),
/ Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
/ Check wiring. See that all connections
are still secure and wires are properly
clamped.
While learning how to use your tractor, pay
extra attention to the following important
items:
/ Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean, regu
lar unleaded gasoline.
/ Become familiar with all controls - their
location and function. Operate them
before you start the engine.
/ Be sure brake system is in safe operat
ing condition.
11