Owner`s manual

TRACTOR -- MODEL NUMBER 917.275285
KOHLER ENGINE-MODEL NUMBER CV740,TYPE NUMBER 0018
IGNITION/ELECTRICAL BLOWER HOUSING & BAFFLES
KEY PART KEY PART
NO. NO. DESCRIPTION NO. NO.
1. 54-755-15-S Kit, grass screen 1.
(Includes 2-4, and 24 113
18-S) 2.
2. M-403025-S Screw, hex. cap M4x0.7x25
(,4)
3. 24-112-04-S Spacer, grass screen (4) 5.
4. 25-086-47-S Bolt, shoulder M6x1.0x16 (4)
5. 24-157-08-S Fan 6.
6. 12-086-14-S Screw, hex. flange
M10x1.5x46 7.
7. 12-468-03-S Washer, plain 3/8"
8. X-42-15-S Key 8.
9. 24-025-15-S Flywheel
10. 41-403-09-S Rectifier-regulator 9.
11. X-25-92-S Washer, plain 3/16" (2) 10.
12. 24-086-18-S Screw, phillips hd. 11-16x7/8" 11.
(2)
13. 236602-S Connector (3 contact) 12.
14. 12-132-02-S Spark Plug (2) 13.
15. 54-755-09-S Kit, 15 amp stator
(Includes 16) 14.
16. 24-126-71-S Bracket, stator wire 15.
17. M-548025-S Screw, hex. cap M5x0.8x25
(2)
18. 47-154-01-S Clip, cable
19. 48-154-02-S Clip, cable
20. X-25-63-S Washer, plain 1/4"
21. 24-584-31-S Module, ignition(2) KEY PART
22. M-561025-S Screw, hex flange NO. NO.
M5x0.8x25 (4)
23. M-448010-S Screw, hex. cap 1.
M4x0.7xl 0 (2)
24. 24-584-27-S Module, speed advance 2.
25. 24-063-27-S Baffle, heat shield 3.
4.
NOT ILLUSTRATED 5.
X-22-11 -S Washer, lock 1/4" 6.
24-176-81-S Harness, wiring 7.
Lead, black (rect.-reg. 5" - 12 8.
gauge 9.
24-518-12-S insulatedgrip barrel eyelets) 10.
24-113-18-S Decal, grass screen 11.
25-454-03-S Tie, wire (3) 12.
13.
14.
DESCRIPTION
24-027-114-S
24-100-01-S
24-096-85-S
25-086-91 -S
M-545020-S
M-551016-S
M-545016-S
M-645016-S
24-146-16-S
24-146-20-S
24-063-20-S
24-063-14-S
24-063-58-S
24-063-60-S
M-545010-S
Housing, blower (Includes
2-4)
Nut, plastic (3)
Cover
Screw, tapping
Screw, hex. flange
M5x0.8x20 (4)
Screw, hex. flange
M5x0.8xl 6
Screw, hex. flange
M6x0.8xl 6 (3)
Screw, hex. flange
M6x1.0x16 (6)
Plate, backing - # 2 side
Plate, backing - # 1 side
Baffle, cylinder barrel-# 2
side
Baffle, valley - #2 side
Baffle, cylinder barrel-# 1
side
Baffle, valley - #1 side
Screw, hex. flange
M5x0.8xl 0 (2)
AIR INTAKE/FILTRATION
DESCRIPTION
54-755-01-S
25-341-03-S
24-153-20-S
24-096-67-S
12-100-01-S
24-096-01-S
231032-S
24-083-05-S
24-083-03-S
24-109-09-S
24-041-13-S
24-094-34-S
24-041-14-S
24-164-51-S
15. 24041 52-S
16. 24 153 27-S
17. M-651040-S
18. 24 126 130-S
19. M-545010-S
20. 24-063-51-S
Kit, knob with seal (Includes
2,3)
Knob, cover
O-Ring
Cover, air cleaner
Wing Nut
Cover, inner air cleaner
Seal, breather
Precleaner, element
Element, air cleaner
Cup, fuel spit-back
Gasket, fuel spit-back cup
Base, air cleaner
Gasket, air cleaner base
Manifold, intake (Includes
15,16)
Gasket, carburetor
O-Ring, intake port (2)
Screw, hex. flange
M6x1.0x40 (4)
Bracket, air cleaner base
Screw, hex. flange
M5x0.8xl 0 (2)
Baffle, spit-back cup
NOTE: All component dimensions given in U.S.
inches 1 inch= 25.4 mm
53