User Manual

TRACTOR - - MODEL NUMBER 917.276210
TRANSAXLE
KEY PART
KEY PART
NO. NO. DESCRIPTION
NO. NO. DESCRIPTION
1 4197R Ax!e Shaft
52 8119M Needle Bearing
2 12000034 Retaining Ring
53 4220R Thrust Bearing Race
3 4199R Final Drive Gear
54 4209R 3rd Reduction Pinion, Low
4 4216R Differential Gear
55 4213R 4th Reduction Gear
5 4215R Differential Pinion
56 4442R 3rd Reduction Pinion Spacer
6 4217R Differential Carrier
57 4195R 2nd Reduction Gear Shaft
7 174728 Axle Thrust Washer
58 4214R Final Drive Pinion
8 74020652 Bolt, Hex Head 3/8-24 x 3-1/4
59 4194R 1st Reduction Gear Shaft
(1" Thread Length)
60 7528R 1st Reduction Shaft Spacer
9 7392M Steel Ball
61 4208R 3rd Reduction Pinion High
10 137261 Spring Shift Fork Detent
62 4207R 2nd Reduction Gear
11 4985R Shift Fork, High-Lo\A/ Range
63 7398H Needle Bearing
12 6266H Thrust Bearing Race
64 4203R Low Speed Gear and 2nd
13 4212R 4th Reduction Pinion
Reduction Pinion Cluster
14 137125 Shaft, Brake
65 4204R Reverse Gear
15 6276H Snap Ring, Crescent Type
66 2898J Key, Hi-Pro 1/8 X 17/32
16 633A63 High-Low Range Gears
67 12000033 Klip Ring
17 8118M Needle Bearing
68 4205R Intermediate Speed Gear
18 8740H1 Sintered Iron Bearing
69 4206R High Speed Gear
19 122238X Shift Fork Shaft, High-Low Range
70 1370H Thrust Bearing Race
20 4218R Differential Pinion Spacer
71 633A69 Intermediate and High Speed
21 6252H1 Differential Pinion Bushing
Cluster Pinions
22 781 OH Gripco Centerlock Nut 3/8-24
72 139120 Input Shaft
23 6262H Shift Fork, R.H.
73 4201R Low Speed Pinion
24 7393R Oil Seal
74 12000008 E-Ring
25 992R1 Sintered Iron Bearing
75 1153R Reverse Idler Gear
26 139111 Shift Fork Shaft
77 6803J Needle Bearing
27 4986R Shift Fork, LH.
79 1167R Sealing Washer
28 122254X Shift Shaft, High-Low Range
80 73360700 Nut, Hex, Jam 7/16-20
29 6269H Oil Seal
81 6270H Oil Seal
30 5855H Pressure Relief Valve
82 136984 Reverse Idler Shaft
31 174731 Gearcase, Reverse Idler Shaft
84 5384J Gearshift Lever, Bent
and Bearings, R.H. (Includes
85 2978J Gearshift Cap
Key No.’s 17,18, 25, 33, 50, 63.
86 633A85 Gearshift Ball Cover and Pin
77 and 82)
87 8739H1 Shift Lever Guide Ball, Keyed
32 6277H Dowel Pin
88 4924H Spring
33 4225R Needle Bearing
89 19151516 Washer 15/32 x 15/16 x 16 Ga.
34 7396H Thrust Bearing Race
90 110542X Shift Mechanism Seal
35 4198R 4th Reduction Gear Shaft
91 19181511 Washer 9/16 x 15/16 x 12 Ga.
36 4200R 4th Reduction Gear Spacer
92 75J Gearshift Gate and
37 7395H Thrust Bearing Race
Reinforcement
38 160789 Gate, Lower, Shift
93 6274H Shift Ball Cover Gasket
39 174729 Gearcase and Bearings, L.H.
94 76020412 Cotter Pin 1/8 X 3/4
(Includes Key umbers 18, 25, 49,
96 194036 Bolt Hex 5/16-18x1 Epoxy
50 (2), 51 and 52)
97 194121 Lever Assembly ROS Gearshift
40 13320400 Pipe Plug 1/2-14 N.RT.
98 184956 Transaxle, 6 Speed, Complete
41 17580520 Bolt, Hex 5/16-18 UNCx 1-1/4
Assembly
45 6271H Oil Seal
99 193833 Actuator, Shift Lever
46 13060200 Pipe Plug 1/4-18 N.RT.
49 4895H Needle Bearing
NOTE: All component dimensions given in U.S. inch
50 4222R Needle Bearing
1 inch = 25.4 mm
51 1529R Needle Bearing
49