Owner`s manual

ASSE BLY

CONNECT SHIFT ROD (See Fig. 6, 7 & 8)

• Insert end of shift rod farthest from bend into hote of shift

lever indicator.

, Insert hairpin clip through hole of shift rod to secure.

• Insert other end of shift rod into hoie in shift lever.

• Insert second hairpin clip through hole of shift rod.

ATTACH THIS END TO

SHIFT LEVER

INDICATOR

' /

SHIFT ROD

ATTACH THIS END TO

SHIFT LEVER

INDICATOR

FIG. 6

SHIFT HAIRPIN

CLIP

SHIFT

LEVER

INDICATOR

FIG. 7

REMOVE TILLER FROM CRATE

, Make sure shift lever indicator is in "N" position (See Fig.

• Tilt filler forward by lifting handle. Separate cardboard

cover from leveling shield.

, Rotate tiller handle to the right and putl tiller out of carton.

SHIFT LEVER

HAIRPIN CLIP

SHIFT ROD

FIG. 8

CHECK TIRE PRESSURE

The tires on your unit were overinflated at the factory for

shipping purposes. Correct and equal tire pressure is

important for best tilling performance.

• Reduce tire pressure to 20 PSI.

CABLE CLIP (See Fig. 9)

Insert plastic cable clip into hole on the back of handle

column. Push cables into clip.

CABLES

CABLE

CLIP

FIG, 9

HANDLE HEIGHT

, Handle height may be adjusted to better suit operator

(See "TO ADJUST HANDLE HEIGHT" in the Service

and Adjustments section of this manual).