Owner`s manual

CONNECT SHIFT ROD (See Fig. 6)

. Insert end of shift rod farthest from bend intohole of

shift lever indicator,

• Insert hairpinclip through hole of shift rodto secure.

° insert otherend of shift rod into hole in shift lever.

° Insert second hairpinclipthroughholeof shift rod.

ATTACHTHISEND

TO SHIFT LEVER :

INDICATOR

ATTACH THIS

END TO SHIFT

LEVER .\_,_

SHIFT ROD

illliH ii j ii ii llll i ii ...............

SHIFT : _ HAIRPIN SHIFT

CLIP _ LEVER

INDICATOR

SHIFT LEVER

HAIRPINCLIP

SHIFT ROD

FIG. 6

REMOVE TILLER FROM CRATE

Make sure shift lever indicator is in "N" (neutral) posi-

tion (See Fig. 6)

Tilt tiller forward by lifting handle. Separate cardboard

cover from leveling shield.

Rotate tiller handle to the right and pull tiller out of

carton.

INSERT CABLE CLIP (See Fig. 7)

• Insert plastic cable clip intohole on the back of handle

column. Pushcables intoclip.

CABLE CLIP

FIG. 7

CHECK TIRE PRESSURE

The tires on your unit were overinflated at the factory for

shipping purposes. Correct and equal tire pressure is

important for best tilling performance.

• Reduce tire pressure to 20 PSI.

HANDLE HEIGHT

• Hand!e height may be adjusted to better suit operator.

(See q'O ADJUST HANDLE HEIGHT' inthe Service

and Adjustments section of this manual).