Owner`s manual

CONNECT SHIFT ROD (See Fig. 6)

= insertend of shift rod into holeof shift lever indicator_

• insert hairpin clip through hole of shift rod to secure.

INSERT CABLE CLIP (See Fig. 7)

• Insert plasticcable clip into hole on the back of handle

column. Push cables into clip,,

SHIFT HAIRPIN SHIFT

CLIP LEVER

INDICATOR

HANDLE

COLUMN

CABLES

CABLE CLiP

FIG. 6

FIG. 7

REMOVE TILLER FROM CRATE

• Make sure shift lever indicator isin "N" (neutral) posi-

tion (See Fig. 6)

• Tilt tiller forward by lifting handle_

• Rotate tiller handle to the right and pull tiller out of

carton.

CHECK TIRE PRESSURE

The tires on yourtiller were overinflated at the factory for

shipping purposes. Correct and equal tire pressure is

important for' best tilling performance.

• Reduce tire pressure to 20 PSi°

HANDLE HEIGHT

• Handle height may be adjusted to better suit operator_

(See 'q'O ADJUST HANDLE HEIGHT" in the Service

and Adjustments section of this manual)=