Owner's Manual CRAFTSMAN° ROTARY LAWN MOWER 675 Series Briggs & Stratton Engine Power-Propelled 22" Multi-Cut Model No. 917.370620 • Espa_ol, p. 20 CAUTION'. Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman website: www.sears.com/craftsman U.S.A.
Maintenance ...................................... Service and Adjustments ................... Storage .............................................. Troubleshooting ................................. Repair Parts ....................................... Sears Service .......................... Back Warranty ................................................... 2 Safety Rules .......................................... 2-4 Product Specifications .............................. 4 Assembly / Pre-Operation ........
I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. • Only allow responsible individuals, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc.
• Never fill containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. • Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle. • Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.
Repair Protection Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation. Agreements • Fast help by phone- phone support from a Sears representative on products requiring in-home repair, plus convenient repair scheduling.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower product. Learn and understand their meaning.
The operationof any SAFETY GLASSES lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Alwayswear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles. HOW TO USE YOUR LAWN MOWER ENGINE SPEED The engine speed was set at the factory for optimum performance. Speed is not adjustable.
TO EMPTY GRASS CATCHER 1. Lift up on grass catcher using the frame handle. 2. Remove grass catcher with clippings from under lawn mower handle. 3. Empty clippings from bag using both frame handle and bag handle. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. Open mulcher door I Grass catcher frame handle I Discharge deflector BEFORE STARTING ENGINE ADD OIL Your lawnmower is shipped without oil in the engine.
TO STOP _IL CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. _, CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer.
MULCHING MOWING TIPS CAUTION: Do not use de-thatcher blade attachments on your mower. Such attachments are hazardous, will damage your mower and could void your warranty. • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time.
MAINTENANCE SCHEDULE BEFORE EAC H USE Check for Loose Fasteners ,_ Clean / Inspect Grass Catcher * _ AFTER Check Tires Check Drive Wheels *** Clean Lawn Mower**** _#, EAC H v' v' v' v' v'3 v' v' GENERAL v_ vl V_,2 _4 v' _ Inspect Muffler N Replace Spark Plug I_' Replace Air Filter Paper Cartridge Empty fuel system or add Stabilizer *** Power-Propelled mowers **** Use a scraper to clean under deck BEFORE STO RAG E _V' Check Engine Oil level E Change Engine Oil N Clean Air Filter mowers EV
LAWN MOWER Always observe safety rules when performing any maintenance. TIRES • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. DRIVE WHEELS Check front drive wheels each time before you mow to be sure they move freely. The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.
GRASS CATCHER Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine. . • The grass catcher may be hosed with water, but must be dry when used. • Check your grass catcher often for damage or deterioration. Through normal use it will wear.
CLEANING Back plate IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use. ,I&CAUTION" Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. • Clean the underside of your lawn mower by scraping to remove build-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.
A 1. 2. 3. WARNING: To avoid serious injury, before performing any service and adjustments: Release control bar and stop engine. Make sure the blade and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. LAWN MOWER NOTE: Always use factory approved to assure proper fit and long life. TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.
ENGINE ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to a Sears or other qualified service center for repair and adjustment. CARBURETOR Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment.
ENGINE ENGINE OIL FUEL SYSTEM Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage.
PROBLEM Loss of power CAUSE . . 3. 4. 5. 6. Poor cut - CORRECTION Rear of lawn mower housing or cutting blade dragging in heavy grass. Cutting too much grass. Dirty air filter. Buildup of grass, leaves, and trash under mower. Too much oil in engine. Walking speed too fast. 1. Worn, bent or loose blade. uReverl 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive vibration . Worn, bent or loose blade. 2. Bent engine crankshaft. Starter rope hard to pull . .
Garantia ................................................... Reglas de Seguridad ............................... Especificaciones del Producto ................. Montaje / Pre-Operaci6n ......................... Operaci6n ................................................ Programa de Mantenimiento ................... GARANTiA Mantenimiento .......................................... 30-33 Servicio y Adjustes ................................... 33-34 Almacenamiento .......................................
I. OPERACION • Siempre use gafas de seguridad o anteojos con protecci6n lateral cuando opere la segadora. • Antes de empezar, debe familiarizarse completamente con los controles y el uso correcto de la maquina. Para esto, debe leer y comprender todas las instrucciones que aparecen en la maquina yen los manuales de operaci6n. • No ponga las manos o los pies cerca o debajo de las partes rotatorias. Mantengase siempre lejos de la abertura de la descarga.
• Nuncarepostarla maquinaal interiorde un local. • Nuncaguardarla maquinao el contenedor degasolinadondehayunallamaabierta, chispao luzpilotocomounacalderau otros dispositivos. • NuncaIlenarcontenedores en unvehiculo, en uncami6no caravanaconunforrode plastico.Colocarsiempreloscontenedores en elsuelolejosdesu vehiculoantesde Ilenar. • Quitarequiposquefuncionancongasolina delcami6no caravanay repostarenel suelo.
Acuerdos de Protecci6n Congratulaciones por su buena compra. Su nuevo producto Craftsman® esta diseSado y fabricado para funcionar de modo liable pot muchos a_os. Pero como todos los productos, puede necesitar alguna reparaci6n de tanto en tanto. En este caso tenet un Acuerdo de Proteccidn para la Reparacidn puede hacerles ahorrar dinero y fastidios.
Lea estas instrucciones y este manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortacesped viene SIN ACEITE O GASOLINA en el motor. Su segadora nueva ha sido montada en la fabrica con la excepci6n de aquellas partes que se dejaron sin montar por razones de envio. Todas las partes como las tuercas, las arandelas, los pernos, etc., que son necesarias para completar el montaje han sido colocadas en la bolsa de partes.
FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser producto. Aprenda y comprenda ATTENCION O ADVERTENCIA MOTOR ENCENDIDO MOTOR APAGADO sobre su segadora sus significados.
La operaci6ndecualquier SEGURIDAD segadorapuedehacerque saltenobjetosextrafiosdentrode susojos,Ioquepuedeproducir dafiosgravesenestos.Siempre useanteojosdeseguridado protecci6npara losojosmientrasoperesu segadorao cuando hagaajusteso reparaciones. Recomendamos gafaso unamascaradesegufidaddevisi6n ampliadeseguridadusadasobrelasgafas. COMO USAR SU SEGADORA VELOCIDAD DEL MOTOR La velocidad del motor se estableci6 en la fa= brica para un rendimiento 6ptimo. La velocidad no se puede ajustar.
Paraconvertira la operaci6ndeensacado o dedescarga,el desviadordela descarga debeserremovidoy la protecci6ncontrala descargadebeestarcerrada. PARA VACIAR EL RECOGEDOR DE CESPED 1. Levante el recogedor de cesped usando el mango del bastidor. 2. Remueva el recogedor de cesped, con los recortes, de debajo del mango de la segadora. 3. Vacie los recortes de la bolsa. AVlSO: No arrastre la bolsa cuando la vacie; se producira un desgaste innecesario.
PARA PARAR EL MOTOR • Para parar el motor, suelte la barra de controles que exigen la presencia del operador. ,I_PRECAUCI6N: Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. ,APRECAUCI([:)N: Los combustibles PARA HACER ARRANCAR mezclados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separaci6n y formaci6n de acidos durante el almacenamiento.
ONSEJOS PARA SEGAR CONSEJOS PARA SEGAR Y ACOLCHAR IMPORTANTE: Para obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea "LIMPIEZA" en la seccion de Mantenimento de este manual. PRECAUClON: No utilizar dispositivos antipaja de la hoja en la segadora ya que estos accesorios son peligrosos, pueden dafiar su segadora y anular su garantia.
PROGRAMA DE ANTES MANTENIMIENTO S Revisar si hay Sujetadores Sueltos de Cesped * Limpiar/Inspeccionar el Recogedor _1_ E Controlar los NeumAticos I_ Controlar las Ruedas Motrices *** Limpiar la Segadora ....
SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Mantenga las Ilantas sin gasolina, aceite o substancias quimicas para control de Jnsectos que pueden dafiar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden dafiar a las Ilantas. RUEDAS DE IMPULSI6N Revise las ruedas de impulsi6n delanteras cada vez antes de segar, para asegurarse de que se mueven libremente.
RECOGEDOR DE CO:SPED • El recogedor de cesped puede ser rociado con el agua de la manguera pero tiene que estar seco cuando se vaya a usar. • Revise su recogedor de cesped a menudo para verificar siesta dafiado o deteriorado. Se va a desgastar con el uso normal. Si se necesita cambiar el recogedor, cambielo solamente por uno que sea aprobado por el fabricante. De el n0mero del modelo de la segadora cuando Io ordene.
Labio Plancha trasera LIMPIEZA IMPORTANTE: Para obtener el mejor rendimineto, mantenga la caja de la segadora sin acumulacion de cesped y basura. Limpie la parte de abajo de su segadora despues de cada uso. AI:_PRECAUCl6N: Desconecte el alambre de la bujia y p6ngalo en donde no pueda entrar en contacto con esta. • Haga descansar la segadora en su lado. AsegQrese que el filtro de aire y que el carburador queden mirando hacia arriba.
AI:iLADVERTENClA: Para evitar lesi6nes serias, antes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. AsegQrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. 3. Desconecte el alambre de la bujia y p6ngalo en donde no pueda entrar en contacto con esta. 6. Reinstale la fijador de la correa y cubierta de la impulsi6n. NOTA: Siempre use la correa aprobada por la fabrica para asegurarse que calce y dure.
MOTOR debido a problemas que se sospecha vienen del carburador, Ileve su segadora a contacto con su centro de servicio Sears o con un otro centro de servicio cualificado para repararla y/o ajustarla. IMPORTANTE: Nunca manipule el regulador del motor, el que ha sido ajustado en la fabrica para la velocidad del motor adecuada. Puede set peligroso hacer funcionar el motor a una velocidad por sobre el ajuste de alta velocidad de la fabrica.
MOTOR ACEiTE DEL MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es importante evitar que se formen depositos de coma en partes fundamentales del sistemade combustible tales como el carburador, el filtro del combustible, la mangura del combustible o en el estanque durante el almacenamiento. Los combustibles mezclados con alcohol (conocido come gasohol o que tienen etanol o metanol) Pueden atraer humedad, Io que conduce a la separacion y a la formaci6n de acidos durante el almacenamiento.
SOLUCION DE PROBLEMAS est_ dirigido Altura de las ruedas dispareja. Velocidad del motor lenta. 4. Acumulaci6n de cesped, hojas o basura debajo de la segadora. Demasiado aceite en motor. Velocidad de recorrido . Dificil de empujar 2. Eleve la altura de corte. 3. 4. Limpie/cambie el filtro de aire. Limpie la parte inferior de la caja de la segadora. Revise el nivel del aceite. Corte a una velocidad de recorrido mas lenta. 5. 6. rapida. Cuchilla desgastada, o suelta.
\ O N \ 0 lvl iI iii m Z / iii a 0 ! I ILli 0 Z / 0 Z I--I.i..
d °_ {D c _o -_ o_ O I {D C T C -._ c _o,,, 00 © N _ 0 N © o o o o X X ko O__ i 0 _O i i _ co coco t_ N N c) © N m _J .-o Ed © oo W r_ >_ E Z N H _J r'to co i c _X qO 03 c O0 _ -(3 G5 (i) 0 o4 -_ ..1 {D × _8 W a 0 og o __ __ _ r- © O co .--- © .
\ / oo oq / \ . co co \ \ \ / / / / / I no{ / , / I \ \ \ co \ \ Z I1,1.
C B o z _ d -Q © o_ E o _ -Q 0 E 0 N z o > -o c {5 _ G) oO E E -_ (D oO 0 o 0 x _< , _® cn m E _J .-o u_ Ed E_ o W a H _J ccr--_Q Z -.1 W a 0 _8 r- >. _d o .-- © .-o _Z I m > W co 0 x r- r- EE Z oo -,_ _ LL 04 £ o4 x-_ g_ E_ ..Q 0 _ O 8_ O3 o_ z_ Z < r.-- C_ n7 < W n n n n7 _ n7 U_ n E cr 0 XX_ X _0_0_ _ 0__00_ _ 0_ __O_ON_O_N r'- __0@ _ _0_ -tO c" O CO >. _d O3 _Z O o.
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 126T02=1401=B1 [ 4=SHORT=LOCK ] I 1058 OPERATOR'S MANOAL I [1329REP_OEMENTENG,NE ] I 1330REPA,RMANOAL I li 718 10 _ 8 868 684 _? 306 11 _._ _ 51 ,_< _Z.¢ ] 54 307 _471 i 562 24 i_ 505@ 287 _ 13 (_S _ 5( 615 ® @ 404 ¢_ 525i 616 _ 741 635 15 _ 22 _ 26 42 20 _.
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 126T02=1401=B1 109 _-'_ 633A 163 130 137 _i_ 276 _ 276 _ _' 188_% 3OO 222 883 968 .................... =........................... 29!__.
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 1036 EMISSIONS 564 _ 126T02=1401=B1 LABEL 969 55 58 1211 \\\\ 1210 921 / 669 _ 456 597 305 356 .... "_ 851_ 332_ 455 745 635 W-'=: 922 621 .......... _....
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 121 CARBURETOR 104 \_ - OVERHAUL 137 127 _ KIT 617 276 _'--_ 358 ENGINE 126T02=1401=B1 GASKET 633 _9 SET 3 _ 842 _ ,_` y 51 \_4_ 163 524 _ _:> 585 12 1095 VALVE GASKET SET 9 7 883 Engine Power Rating Information The gross power rating for individual gas engine models is labeled in accordance with SAE (So= ciety of Automo=tive Engineers) code J11940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtaine
BRIGGS & STRATTON KEY NO. PART NO. 1 2 697322 399269 4-CYCLE ENGINE MODEL NUMBER 126T02=1401=B1 KEY NO. PART NO.
BRIGGS & STRATTON 4-CYCLE KEY NO. PART NO. DESCRIPTION 404 425 443 690272 690670 692523 445 455 456 459 505 523 524 525 562 564 584 585 592 597 601 604 608 613 615 616 617 491588s 791960 692299 281505s 691251 499621 692296 • 495265 691119 698589 697734 691879 • 690800 691696 791850 790703 497680 790833 690340 698801 270344s,* 621 633 ENGINE MODEL NUMBER KEY NO. PART NO.
NEED MORE HELP? YOu']_[ fiTld theanswera;_id moreor_,. maaagemyhomeo{om - forfree[ o Find this and at[ your other product manua[s online. o Get answers from our team of home experts. o Get a persona[ized o Find information maintenance plan for your home. and tools to help with home projects.
