Owner`s manual

llilVl(l Ii A IIIT T
TO ADJUSTHANDLE
Your lawn mower handle can be raised or lowered
for your mowing comfort. Figs. 16A, 16B, 17A and
17B show the four (4) positions that are avaiJable:
High, medium high, medium low and low. Handles
are shipped mounted in the medium low position (See
Fig. 16A)
To change from medium low to medium high posi-
tion, the upper and lower handle sections will
have to be turned over (See Fig. 16B).
o Remove the controls and operator presence con-
trol bar from the upper handle.
Remove the starter rope guide from the lower
handle.
o Remove hairpin cotters.
Disconnect the lower handle from the handle
brackets (See Fig.. 18).
Turn the handle over and reassemble the hairpin
cotters that have been removed (See Fig. 18).
o Reassemble the starter rope guide.
• Reassemble the controls and the operator
presence control bar to the upper handle.
CAUTION: THEOPERATORPRESENCECONTROL
BAR tYIUSTPIVOT FREELYTO PERMIT BLADE
BRAREENGAGEMENTWHEN CONTROLBARIS
RELEASED. DO NOT OVERTIGHTEN THE
FASTENERSHOLDING THE CONTROLSTO THE
UPPERHANDLE.
o To change from medium tow to high position on-
ly the upper handle section will have to be turn-
ed over (See Fig. 17A).
o To change from medium low to low position, on-
ly the lower handle section will have to be turn-
ed over (See Fig. !7B).
SHIPPING POSIT{ON
MEDIUM LOW
FIG. 16A
MEDIUM
HIGH
FIG. 16B
HIGH
FIG. 17A
FIG. 17B
LOWER HANDLE
HAIRPIN COTTER
HANDLE BRACKET
FIG. 18
16