Owner`s manual

MOWERACCESSORIES
These accessories were available when this lawn mower was produced. They are also available at most Sears
retail outlets, catalog and service centers. Most Sears stores can order repair parts for you, when you provide
the model number of your lawn mower. Some of these accessories may not apply to your lawn mower.
ENGINE
MUFFLERSPARKPLUG
©
LAWNMOWERMAINTENANCE
AIR FILTER
,,, , ..,.,, ............................
GASCAN
BELT
....:=::.... ..................................
ENGINEOIL
BLADE BLADEADAPTER
ASSEMBLY
WHEEL5
STABILIZER
LAWN MOWERCOVER
l
tory except for the Grass Catcher Bag and the Grass
Catcher Frame.
TO REMOVELAWNMOWERFROMCARTON
• Cut down the corners of the carton and lay ends
and sides down.
• Cut the plastic wrapping and remove from over
Handles and lawn mower.
• Remove Catcher Frame, Fabric Bag and Oil Bot-
tle from on top of lawn mower.
• Remove Engine Cover and discard.
• Lift lawn mower off of shipping base and check
carton for loose parts_
HOWTOSET-UPYOURLAWNMOWER
TO UNFOLDHANDLE
Remove any packing material from around Control
Bars°
o Raise Lower Handle section until it isin the upright
storage detents (See Fig. 2).
• Raise Upper Handle section until it isin-line with
Lower Handle and tighten one Handle Knob (See
Fig. 1).
• Lower the entire Handle Assembly to the mow-
ing position and engage the Height Adjustment
Links onto the Handle Bracket Pins (See Fig 2)o
See "Adjust Handle" section, page t6 to select
the most comfortable Lawn Mower Handle posi-
tion. Be sure both sides are in same adjustment
hole_
CONTROL BAR_
"_/ LOV_ER , -
,'_ HA\DLE ,."
HANDLE KNOB_ "V. / _ , "'-"
L,_Tu_f_;_-::_.?L:,Y:'.::,".'b" •LX
=0_ " 3",.
FIG. 1
HANDLE
BRACKET
OETENTS
HEIG
ADJUSTMENT
LINK
FIG. 2