Owner`s manual

TO ADJUSTHANDLE
Your lawn mower handle can be raised or lowered
for your mowing comfort. Figs. 9A, 9B, IOA and lOB
show the four (4) positions that are available: High,
medium high, medium tow and Iow_ Handles are
shipped mounted in the medium tow position (See
Fig. 9A)
To change from medium low to medium high posi-
tion, the upper and lower handle sections will
have to be turned over (See Fig. 9B)o
o Remove the cable clips°
• Remove the controls and operator presence con-
trol bar from the upper handteo
o Remove the starter rope guide from the lower
handle_
o Remove hairpin cotters°
o Disconnect the lower handle from the handle
brackets (See Fig° 11)o
o Turn the handle over and reassemble the hairpin
cotters that have been removed (See Fig° t 1).
o Reassemble the starter rope guide_
• Reassemble the controls and the operator
presence control bar to the upper handle.
o Replace the cable clips previously removed (See
Fig_ 2, Page 6).
CAUTION:THEOPERATORPRESENCECONTROL
BARMUSTPIVOTFREELYTO PERMITBLADE
BRAI(EENGAGEMENTWHENCONTROLBARIS
RELEASED.DO HOT OVERTIGHTENTHE
FASTENERSHOLDINGTHECONTROLSTO THE
UPPERHANDLE.
o To change from medium low to high position om
ty the upper handle section will have to be turn-
ed over (See Fig, IOA)_
• 1"ochange from medium low to low position, on-
ly the lower handle section will have to be turn-
ed over (See Fig. lOB),
Mi!Dflivl
HIGH
\
FIG. 9A FIG. 91
HIGH
\
FIG. iOA FIG. lOB
HANDLE
HAIRPIN COTTER HANDLE BRACKET
FIG. 11
13