Owner`s manual

I lllll LII I I I
!'0 UNFOLDHANDLE(CONT'D)
ASSEMBLY
• Your Lawn Mower has been shipped with Pro-
tective Handle Padsplaced between the upper
and lower sectionsof the handle. For best lawn
mower performance these Pads need to be
discarded after the handle isplaced in the mow-
ing position.
• Once the Handle is in the mowing position,
remove the Handle Knob, Handle Bolt and Pro-
tective Pad from the side with the loose Handle
Knob. (Make sure the other side is tight to sup-
port the Upper Handle).
• Discard the Pad and reinstall the Handle Bolt and
Knob--Tighten securely.
• Loosen and remove the Handle Knob, Handle
Bolt and Protective Pad from the other side and
discard the Pad.
• Reinstall the Handle Bolt and Knob-- Tighten
securely. Now your handles should be clamped
together without the protective pads.
TO ASSEMBLE& ATTACHGRASSCATCHER
• Put grass catcher frame into grass bag with stiff
part of bagon the bottom (See Fig. 3).Make sure
the framehandle is outside of the bag top.
• Slip vinyl bindings over frame (See Fig. 3).
NOTE:If vinyl bindings are too stiff, hold them in warm
water for a few minutes. If bag gets wet, let it dry
before using.
• Lift the rear door of the lawn mower and place
the catcher frame side hooks onto the handle
bracket hooks (See Fig. 4).
• The grass catcher is secured to the lawn mower
housing when the rear door is lowered onto the
grass catcher frame.
CAUTION: DONOTRUNYOURLAWNMOWER
WITHOUTCLIPPINGDEFLECTORORAPPROVED
GRASSCATCHERIN PLACE.NEVERATTEMPTTO
OPERATETHELAWNMOWERWITH THEREAR
DOORREMOVEDOR PROFI_DOPEN.
CATCHER
HANDLE
FIG. 3
CATCHEI
FRAME
S{DE HOOK
BRACKET
FIG.4
II II I llIIl
FRAME
OPENING
DOOR GRASS
-CATCHER
FRAME