Owner's Manual IC..FTSMnWl ROTARY LAWN MOWER 4.5 Horsepower 22" Side Discharge Model No. 917.387360 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, Visit our Craftsman website: www.sears.com/craftsman IL 60179 U.S.A.
Warranty ................................................... 2 Safety Rules .......................................... 2-4 Assembly / Pre-Operation ........................ 5 Operation ............................................... 6-9 Maintenance Schedule ........................... 10 Maintenance ...................................... 10-13 LIMITED TWO YEAR WARRANTY Product Specifications ............................ 11 Service and Adjustments ................... 13-14 Storage .........................
I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. • Only allow responsible individuals, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc.
• Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning.
TO CONVERT MOWER Your mower is shipped ready to be used as a mulcher. To convert to bagging or discharging: • Lift discharge guard and remove mulcher plate. • Mower can now be used for side discharge or optional grass catcher can be attached. • To return to mulching operation, simply reinstall mulcher plate as shown. ACAUTION: Do not run your lawn mower without discharge guard, approved grass catcher or mulcher plate in place.
BEFORE STARTING ENGINE Gasoline filler cap ADD OIL Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual. CAUTION: DO NOT overfill engine with oil, or it will smoke on startup. 1. Be sure lawnmower is level and area around oil fill is clean. 2. Remove engine oil plug and fill to the top slot in filler hole. Pour oil slowly. NOTE: Allow oil to settle down into engine for accurate reading. 3.
MOWING TIPS _i, CAUTION: Do not use de-thatcher blade attachments on your mower. Such attachments are hazardous, will damage your mower and could void your warranty. • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time.
MAINTENANCE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Check for Loose Fasteners I1_ I/' Clean/InspectGrassCatcher (If Equipped) I_ a Clean LawnMower O (Power-Propelled Clean Under DriveMowers) Cover Check drive belt/pulleys _ Power-Propelled Mowers) Check/Sharpen/Replace Blade I/' l/ l/ i/ v'3 v' =/ LubricationChart CleanBattery/Recharge (Electric Start Mowers) E Check Engine Oil Level t/' a ChangeEngineOil _1,2 G clean Air Filter IV'= I t/ v'4 a Inspect Muffler Clean or Replace Spar
PRODUCT SPECIFICATIONS Serial Number: Date of Purchase: Gasoline Capacity/Type: 1.5 Quarts (Unleaded Regular) Oil Type (API-SF-SJ): SAE 30 (above 32°F); SAE 5W-30 (below 32°F) Oil Capacity: 20 Ounces Spark Plug (Gap: .030") Champion Blade Bolt Torque: 35-40 ft. Ibs. RJ19LM or J19LM The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above.
GRASS CATCHER (If purchased as an accessory) • The grass catcher may be hosed with water, but must be dry when used. • Checkyour grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering. ENGINE 6. Wait one minute to allow oil to settle. Insert and tighten dipstick, move it to check oil level. 7. 8. 9.
MUFFLER Inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARK PLUG Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" in Maintenance section of this manual. CLEANING IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use.
too slow, take your mower to a Sears or other qualified service center for repair and adjustment. CARBURETOR Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed.
ENGINE ENGINE FUEL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage.
TROUBLESHOOTING to a Sears Service PROBLEM Loss of power - See appropriate section in manual unless directed Center. CAUSE CORRECTION 1. Rear of lawn mower housing or cutting blade dragging in heavy grass. 2. Cutting too much grass. 3. Dirty air filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. Poor cut uneven 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower.
Garantia ......................................................... 17 Reglas de Seguridad ................................ 17-19 Montaje / Pre-Operaci6n ............................... 20 Operaci6n ................................................. 21-24 Mantenimiento .......................................... 25-28 Programa de Mantenimiento ......................... 26 Especificaciones del Producto ....................... 27 Servicio y Adjustes ................................... 28-29 Almacenamiento .....
L OPERACION • Antes de empezar, debe familiarizarse completamente con los controles y el uso correcto de la maquina. Para esto, debe leer y comprender todas las instrucciones que aparecen en la maquina yen los manuales de operaci6n. • No ponga las manos o los pies cerca o debajo de las partes rotatorias. Mant6ngase siempre lejos de la abertura de la descarga. • Permita que solamente las personas responsables que est6n familiarizadas con las instrucciones operen la mAquina.
• Nunca haga funcionar una m&quina dentro de un _rea cerrada. • Nunca haga ajustes o reparaciones mientras el motor est6 en marcha. Desconecte el cable de la bujfa, y mant6ngalo a cierta distancia de 6sta para prevenir un arranque accidental. • Mantenga las tuercas y los pemos, especialmente los pernos del accesorio de la cuchilla, apretados y mantenga el equipo en buenas condiciones. • Nunca manipule de forma indebida los dispositivos de seguridad. Controle regularmente su funcionamiento correcto.
COMO PREPARAR SU SEGADORA Lea estas instrucciones y este manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortac_sped viene SIN ACEITE O GASOLINA en el motor. PARA DESDOBLAR EL MANGO IMPORTANTE: Despliegue el mango con mucho cuidado para no pellizcar o dafiar los cables de control. 1. Levante los mangos hasta que la secci6n del mango inferior se asegure en su lugar, en la posici6n para segar. 2.
FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser sobre su segadora o en la literatura proporcionada producto. Aprenda y comprenda sus significados.
PARA CONVERTIR LA SEGADORA Su segadora es enviada para usarse como acolchadora. Para convertirla a una operaci6n de ensacado o de descarga: • Levante la protecci6n contra la descarga y remueva la plancha acolchadora. • Ahora la segadora se puede usar con descarga lateral o se le puede adjuntar el recogedor de c_sped opcional. • Para volver a la operaci6n de acolchamiento, simplemente vuelva a instalar la plancha _lapCOlchadora segt_n se muestra.
ANTES DE HACER ARRANCAR EL MOTOR AGREGUE ACEITE Su segadora fue enviada sin aceite en el motor. Para el tipo y el grado del aceite a utilizar, vea el "MOTOR" en la secci6n del Mantenimiento de este manual. _PRECAUOI(_N: NO sobrellene el motor con aceite, o fumar& cuando Io valla a arrancar. 1. AsegSrese que la segadora est6 nivelada y que el Area atrededor del dep6sito de aceite est_ limpia. 2.
CONSEJOS PARA SEGAR ¥ ACOLCHAR IMPOFITANTE: Para obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea "LIMPIEZA _ in la seccion Mantenimiento de este manual. • La cuchilla acolchadora especial va a votver a cortar los recortes de c_sped muchas veces, y los reduce en tamaSo, de modo que si se caen en el c_sped se van a dispersar entre _ste y no se van a notar.
Revisarsi hay sujetadoressueltos Lirnpiar/inspeccionar el recogedorde I1_ S c_sped(sivieneequipado) Limpiarla segadora I1_ G misi6n(segadorasconpoderpropulsor) Limpiardebajode la cubiertade la trans- I_ _ I_ Ik_ V' V' sadas(segadorasconpoderpropulsor) Revisarlas correasy las poleasimpulRevisaro/afilar/cambiarla cuchilla R a .
ESPECIFICACIONES DEL PRODUCTO Nt3mero de Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: 1.5 Cuartos (Regular sin Plomo) Tipo de Aceite (API-SF-SJ): SAE 30 (Sobre 32°F); SAE 5W-30 (Debajo 32°F) Capacidad de Aceite: 20 Onzas Bujfa (Abertura: .030") TorsiSn del Perno de la Cuchilla: Champion RJ19LM o J19LM 35-40 ft. Ibs. El n_mero deI nodelo y el de serie se encuentran en la calcomania adjunta a la parte trasera de la caja de la segadora.
RECOGEDOR DE CESPED (Si comprado como accesorio) • El recogedor de c_sped puede set rociado con el agua de la manguera pero tiene que estar seco cuando se vaya a usar. • Revise su recogedor de c_sped a menudo para verificar si est_ daSado o deteriorado. Se va a desgastar con el uso normal. Si se necesita cambiar el recogedor, cAmbielo solamente pot uric que sea aprobado pot el fabricante. D_ el n_mero del modeIo de la segadora cuando Io ordene.
SlLENCIADOR Inspeccione y cambie e! silenciador si estA corroido puede producir un peligro de incendio yio daSo. _i, PRECAUCI6N: Desconecte el alambre de Ia bujia y p6ngalo en donde no pueda entrar en contacts con #sta. • Haga descansar la segadora en su lads. Aseg_rese que el filtro de aire y que e! carburador queden mirando hacia arriba. Limpie la parte inferior de su segadora rasp_ndola para remover la acumulaciSn de c_sped y basura. • Limpie e! motor a menudo para evitar que se acumule la basura.
_'f '\ r_pido o demasiado lento, lleve su segadora a mas con su centro de servicio Sears o con un otto centro de servicio cualificado, CARBURADOR Su carburador tiene un chorro principal fijo no ajustable para controlar la mezcla. Si su motor no est_ funcionando en forma adecuada debido a problemas que se sospecha vienen del carburador, Ileve su segadora a contacto con su centro de servicio Sears o con un otto centro de servicio cualificado para repararla yio ajustarla.
MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es importante evitar que se formen depositos de coma en partes fundamentales del sistemade combustible tales como el carburador, el filtro del combustible, Ia mangura del combustible o en el estanque durante el almacenamiento. Los combustibles mezclados con alcohol (conocido come gasohoI o que tienen etanol o metanol) Pueden atraer humedad, Io que conduce a la separacion y a la formaciSn de acidos durante el almacenamiento.
SOLUCION DE PROBLEMAS est6 dirigido a un centro PROBLEMA Falta de fuerza -Vea la secci6n apropiada en el manual amenos que de servico Sears. CAUSA CORRECCION 1. Cuchitla desgastada, doblada o suelta. 1. Ajuste a la posici6n de "Corte mAs alto? 2. Altura de Ias ruedas dispareja. 2. 3. Velocidad del motor lenta. 4. Acumulaci6n de c_sped, hojas o basura debajo de Ia segadora. Demasiado aceite en motor. Velocidad de recorrido 3. 4. 5. 6. 5. 6. demasiado r&pida.
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 67 917,387360 45 50 ,t 40 79 5 33 L. \ 39 \ 40 \ 44 t6 72 35 t...
CRAFTSMAN KEY NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.
CRAFTSMAN 4-CYCLE ENGINE KEY NO, PART NO, DESCRIPTION 1 37791 2 6 7 26727 33734 36557 12 12A 12B 14 15 16 17 18 19 20 30 40 41 32447 36558 36694 28277 30589 34839A 31335 651018 33578 32600 37804 40034 40051 43 45 20381 30963B 46 48 50 32610A 27241 37575 52 69 70 29914 37609 37608 72 72A 75 80 8I 82 37614 28534 27897 30574A 30590A 30591 83 86 89 90 92 93 100 101 103 104 110 119 120 125 30588A 650488 611004 611112 650815 650816 34443C 610118 651007 37480 37047 37755 37807 37806 126 3780
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.034502 i? --g6 KEY PART NO. NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.034502 m8 7_=; 5_ _m 6 KEY NO, PART NO. 1 2 3 4 5 6 7 8 11 590694 590599A 590600 590696 590601 590697 590698 590699 590700 590695A 12 13 590535 590701 DESCRIPTION Recoil Starter Spring Pin (Includes Key Number 4) Washer Retainer Washer Brake Spring Starter Dog Dog Spring Pulley & Rewind Spring Assembly Starter Housing Assembly (40 degree Grommet) Starter Rope (98" x 9,/64" diameter) Starter Handle NOTE: All component dimensions given in U.S.
SERVICE NOTES 38
SERVICE NOTES 39
Your Home For repatr- in your home - of all major brand apphances, lawn and garden equipment, or heahng and coohng systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional _nstallahon of home apphances and _tems hke garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) www.sears.com Anytime, day or night (U S A and Canada) www.sears.
