Owner's Manual JCRHFTSMRN°J ROTARY LAWN MOWER 4.5 Horsepower 22" Side Discharge Model No. 917.387460 • EspaSol, p. 18 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman website: www.sears.com/craftsman U.S.A.
Maintenance ...................................... Service and Adjustments ................... Storage .............................................. Troubleshooting ................................. Repair Parts ....................................... Sears Service .......................... Back Warranty ................................................... 2 Safety Rules .......................................... 2-4 Product Specifications .............................. 4 Assembly / Pre-Operation ........
I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. • Only allow responsible individuals, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc.
• Stop and inspectthe equipmentif you strike an object. Repair,if necessary, before restarting. • Neverattemptto makewheel height adjustmentswhile the engine (motor) is running. • Grass catchercomponentsare subject to wear,damage, and deterioration, which could expose moving parts or allow objectsto be thrown. Frequently check componentsand replace with manufacturer'srecommendedparts, when necessary. • Mowerblades are sharp and can cut.
These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Sears retail outlets and service centers. Some of these accessories may not apply to your lawn mower.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning.
TO CONVERT The operationof any lawn mowercan resultin foreign objectsthrown into the eyes, which can result in severeeye damage.Always wear safetyglasses or eyeshields while operatingyour lawn moweror performing any adjustmentsor repairs.We recommenda standardsafetyglasses or wide vision safetymask worn over spectacles. HOWTO USEYOUR LAWN MOWER Your mower is shipped ready to be used as a mulcher. To convert to bagging or discharging: • Lift discharge guard and remove mulcher plate.
BEFORE STARTING ENGINE Gasoline filler cap ADD OIL Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual. CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup. 1. Be sure lawnmower is level. 2. Remove oil dipstick from oil fill spout. 3. You receive a container of oil with the unit. Slowly pour the entire container down the oil fill spout into the engine.
MULCHING MOWING TIPS CAUTION: Do not use de-thatcher blade attachments on your mower. Such attachments are hazardous, will damage your mower and could void your warranty. • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time.
MAINTENANCE BEFORE AEACH PTEREVERY EVERY EVERY BEFORE EACH 10 25HOURS 100 SCHEDULE USE USE HOURS ORSEASON HOURS STORAGE Check for Loose Fasteners L Clean / Inspect Grass Catcher * Check Tires _ Check Drive Wheels Clean Lawn Mower ....
LAWN MOWER Always observe safety rules when performing any maintenance. Blade adapter Crankshaft Key _ keyway Blade TIRES • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. Blade bolt shaft / \ Trailing edge Blade adapter washer BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades.
NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°E Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation orat least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use.
AqLWARNING: To avoid serious injury, before performing any service or adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. LAWN SQUEEZE TO ADJUST _ Lower handle I L,"• I_, U Handle ',Fbracket "_ Mounting pin -.......
CARBURETOR Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous.
• Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container.
TROUBLESHOOTING - See appropriate section in manual unless directed to a Sears Parts & Repair Center. PROBLEM CAUSE Loss of power Poor cut uneven CORRECTION 1. Rear of mower housing or blade dragging in grass. 2. Cutting too much grass. 3. Dirty air filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive vibration 1.
Garantia ......................................................... 18 Reglas de Seguridad ................................ 18-19 Especificaciones det Producto ....................... 20 Montaje / Pre-Operaci6n ............................... 22 Operaci6n ................................................. 23-26 Mantenimiento .......................................... 27-29 GARANTiA Programa de Mantenimiento ......................... 27 Servicio y Adjustes ...................................
liasabiertas. P6ngase siemprezapatos s61idos. nifios. A menudo, los nifios se sienten atraidos por • Notiredela segadorahaciaatr_sa menos la m&quina y por la actividad de la siega. Nunca queseaabsolutamente necesario. Mire suponga que los nifios van a permanecer en el siemprehaciaabajoy haciadetr&santesy mismo lugar donde los vio pot 51tima vez. mientrasquesemuevehaciaatr&s.
N6mero de Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: Tipo de Aceite Capacidad (API-SF-SJ): de Aceite: Bujfa (Abertura: 1.5 Cuartos (Regular SAE 30 (Sobre sin PIomo) 32°F); SAE 5W-30 (Debajo 32°F) 20 Onzas .030") TorsiSn del Perno de la Cuchilla: Champion RJ19LM o J19LM 35-40 ft. Ibs. • El nSmero del nodelo y el de serie se encuentran en la calcomania adjunta a la parte trasera de la caja de la segadora.
Estos accesorios estaban disponibles cuando se produjo la segadora. No son facilitados junto al ¢ortacesped. Tambi6n estAn disponibles en la mayorfa de las tiendas de Sears yen los centros de servicio. Algunos de estos accesorios tat vez no se apliquen a su segadora.
COMO Lea estas instrucciones y este manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortac_sped viene SIN ACEITE O GASOLINA en el motor. PREPARAR SU SEGADORA PARA DESDOBLAR EL MANGO IMPORTANTE: Despliegue el mango con mucho cuidado para no pellizcar o dafiar los cables de control. 1. Levante los mangos hasta que la secci6n del mango inferior se asegure en su lugar, en la posici6n para segar. 2.
FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser sobre su segadora o en la literatura proporcionada producto. Aprenda y comprenda sus significados.
PARA CONVERTIR LA SEGADORA Su segadora es enviada para usarse como acolchadora. Para convertida a una operaci6n de ensacado o de descarga: • Levante la protecci6n contra la descarga y remueva la plancha acolchadora. • Ahora la segadora se puede usar con descarga lateral o se le puede adjuntar el recogedor de c_sped opcional. • Para volver a la operaci6n de acolchamiento, simplemente vuelva a instalar la plancha _lapCOlchadora ,segt_nse muestra.
ANTES DE HACER MOTOR ARRANCAR EL _PRECAUCION: Los combustibles mezctados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separaci6n y formaci6n de &cidos durante el almacenamiento. La gasolina acfdica puede daSar el sistema del combustible de un motor durante el almacenamiento. Para evitar los problemas con et motor, se debe vaciar el sistema del combustible antes de guardado por un perfodo de 30 dfas o m&s.
CONSEJOS PARA SEGAR _PRECAUCI6N: No utilizar dispositivos antipaja de la hoja en la segadora ya que estos accesorios son peligrosos, pueden daSar su segadora y anular su garantia. • Bajo ciertas condiciones, tal como c_sped muy alto, puede ser necesario el elevar la altura del corte para reducir el esfuerzo necesario para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de c_sped.
PROGRAMA DE MANTENIMIENTO S Umpiadlnspeccionar Controlar DEUSO CADA el RecogedordeC_sped * tos Neum_ticos Controlar Ruedas .... Mortices Umpiar la tas Segadora _) Limpiar debajo la Cubierta de la TransmisiSn Revisar las Correas y las Poteas Impulsadas R Revisar / Afitar / Cambiar la Cuchilta Lubricaci6n *** I_ *** *** Cambiar I_ la Bateria * * _v _ Revisar el nivel del Aceite _ I_ _V' i_ Umpiar / Recargar CADA A.
SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. Arandela de seguridad Cuchilla LLANTAS • Mantenga las llantas sin gasolina, aceite o substancias qu[micas para control de insectos que pueden dai_ar la goma. • Evite los tocones, las piedras, las gdetas profundas, los objetos afilados y otros peligros que pueden daiSar alas Ilantas.
AVISO: A pesar de que los aceites de multiviscosidad (5W30, 10W30, etc.) mejoran el arranque en clima frfo, estos aceites de multiviscosidad van ha aumentar el consume de aceite cuando se usan en temperaturas sobre 32 ° E Revise el nivel del aceite del motor mas a menudo, para evitar un posible daSo en el motor, debido a que no tiene suficiente aceite. Cambie el aceite despu6s de 25 horas de operaci6n o por Io menos una vez al aSo si la segadora se utiliza menos 25 horas el aSo.
_._,DVERTENCIA: Paraevitarlesi6nesserias, antesdedarcalquierservicoo dehacer ajustes: 1. Sueltela barradecontroly pareel motor. 2. Asegt]rese quela cuchillay quetodaslas partesmoviblesse hayandetenidocompletamente. 3. Desconecte el alambredetabujfay p6ngaloendondeno puedaentrarencontacto con6sta. APRIETE PARA AJUSTE i_ _ ]_H Mango inferior_ .
CARBURADOR Su carburador tiene un chorro principal fijo no ajustable para controlar la mezcla. Si su motor no est& funcionando en forma adecuada debido a problemas que se sospecha vienen del carburador, lleve su segadora a contacto con su centro de servicio Sears o con un otro centro de servicio cuatificado para repararla y/o ajustarla. IMPORTANTE: Nunca manipule el regulador det motor, el que ha sido ajustado en la fAbrica para la velocidad del motor adecuada.
ClLINDRO 1. Remueva la bujfa. 2. Vacfe una onza (29 ml) de aceite a tray,s del agujero de la bujfa en el cilindro. 3. Tire la manilla de arranque lentamente unas cuantas veces para distribuir el aceite. 4. Vuelva a montar la nueva bujfa. • Vaciar el dep6sito del carburante poniendo en marcha el motor y dej#,ndolo funcionar hasta que el carburante termine y el carburador est_ vacfo.
SOLUCION DE PROBLEMAS - Vea la secci6n estd dirigido a un centro de servico Sears. PROBLEMA Falta de fuerza en el manual amenos 1. Cuchilla desgastada, doblada o suelta. 1. Eleve la attura de corte. 2. 3. 4. 2. 3. 4. Eleve la altura de corte. Limpie/cambie el filtro de aire. Limpie la parte inferior de la caja de la segadora. Revise el nivel del aceite. Corte a una velocidad de recorrido mAs lenta. Altura de las ruedas dispareja. Velocidad del motor lenta.
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.
CRAFTSMAN KEY NO. Co 1 2 3 4 5 7 11 12 13 16 19 21 22 23 27 30 33 34 35 36 39 40 43 44 45 46 51 52 PART NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.044500 O-370K Ol oo 900 4O0 135 103. 130 126 101 151A 120 42 182 19 41 43 45 186 223....
CRAFTSMAN 4-CYCLE KEY NO. PART NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER ,r- 20A KEY NO. PART NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.044500 _"ql 8 KEY NO. PART NO. - 1 2 3 4 5 6 7 8 11 590694 590599A 590600 590696 590601 590697 590698 590699 590700 590695A 12 13 590535 590701 DESCRIPTION Recoil Starter Spring Pin (Includes Key Number 4) Washer Retainer Washer Brake Spring Starter Dog Dog Spring Pulley & Rewind Spring Assembly Starter Housing Assembly (40 degree Grommet) Starter Rope (98" x 9/64" diameter) Starter Handle NOTE: All component dimensions given in U.S.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME _ (1-800-469-4663) www.sears.com Anytime, day or night (U.S.A. and Canada) www.sears.
