Owner's Manual CRRFTSMRN° LE E T I E 675 Series Briggs & Stratton Engine 22 Inch Cut Model No. 917.773743 • EspaSol, p. 17 LJTION'. Read and follow all Safety Rules and Instructions before operating this equipment. Sears, Roebuck and Co., Hoffman Estates, Visit our Craftsman website: www.sears.com/craftsman IL 60179 U.S.A.
Warranty ................................................... 2 Safety Rules .......................................... 2-4 Product Specifications .............................. 5 Assembly / Pre-Operation ........................ 5 Operation ............................................... 6-8 Maintenance Schedule ............................. 9 Maintenance ........................................ 9-11 Service and Adjustments ................... 12-13 Storage .................................................
AWARNING" Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. A CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual before starting.
ill. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the trimming activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while moving backwards, look behind & down for small children.
Serial Number: Date of Purchase: Gasoline Capacity / Type: 1.6 Quarts (Unleaded Oil Type (API SG-SL): SAE 30 (above 32°F); SAE 5W-30 (below 32°F) Oil Capacity: 20 Ounces Spark Plug (Gap: .030") Trimmer Line Length: Champion Regular) RJ19LM or J19LM 18.75 Inches (0.155 Inch Diameter) . The model and serial numbers will be found on a decal on the rear of the trimmer. Record both serial number and date of purchase in the space provided above.
KNOW YOUR TRIMIVIER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR TRIMMER. Compare the illustrations with your trimmer to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your trimmer and understand their meaning. FAST S LOW or in literature CAUTION ENGINE supplied OFF with the product.
TO ADJUST TRIMMING HEIGHT _,CAUTION" Stop the engine and wait for all moving parts to stop. Disconnectspark plug wire from spark plug and place wire where it cannot come in contact with plug. The height of cut can be set to six (6) different positionsranging from 1-1/2 inches to 3 inches. Recommendedcutting height for the average yard is 2 inches. 1. To adjust trimming height, push in the locking plate tab and move trimmer head up or down to desired position. 2.
ADD GASOLINE • Fill fuel tank to bottom of gas tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. A CAUTION" Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. NOTE: In cooler weather it may be necessary to repeat priming steps.
MAINTENANCE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE T Check for Loose Fasteners R Clean Trimmer I M Clean Under Engine Cover i/ t/ v' !_2 Check Drive Belt / Pulleys R Check / Replace Trimmer Lines 1_3 Check Engine Oil Level Change Engine Oil t#4'1,2 Clean Air Filter Inspect Muffler If I_ 2 Clean or Replace Spark Plug Replace Air Filter Paper Cartridge 1 - Change more often when operating under a heavy load or in high ambient temperatures.
TRIMMER Always observe safety rules when performing any maintenance. TIRES . Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. TRIMMER LINE For best results, replace trimmer lines when they have worn to half their original length. Use .155 inch diameter trimmer line. Cut new trimmer line length to 18-3/4 inches.
ENGINE LUBRiCATiON 6. Replace engine oil cap. 7. Reconnect spark plug wire to spark plug. Use only high quality detergent oil rated with API service classification SG-SL. Select the oil's SAE viscosity grade according to your expected operating temperature. AIR Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions.
A:;I, CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. • Turn trimmer on its side. Make sure air filter and carburetor are up. Clean the underside of your trimmer by scraping to remove build-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. Keep finished surfaces and wheels free of all gasoline, oil, etc.
9. Note the position of the control cable and idler return spring, then remove idler assembly from chassis and remove belt and idler from trimmer. 10. Remove belt from idler assembly by removing bottom belt keeper and idler pulleys. 11. Assemble new belt, idler pulleys and bottom belt keeper to idler bracket. Tighten pulley bolts securely. NOTE: Be sure belt is inside top belt keeper on idler assembly. 12. Position belt and idler assembly in trimmer, reconnect idler spring and assemble idler to chassis.
Immediately prepareyour trimmer for storage at the end of the season or if the unit will not be usedfor 30 days or more. TRIMMER When trimmer is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire trimmer (See"CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened.
TROUBLESHOOTING to a Sears Parts PROBLEM Does not start =See appropriate section in manual & Repair Center. CAUSE unless directed CORRECTION 1. Dirty air filter. 2. Out of fue!. 3. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. Bad spark plug. 7. Throttle control lever not in correct position (if equipped). 1. Clean/replace air filter. 2. Fill fuel tank. 3. Empty fuel tank and refill with fresh, clean gasoline. 4. Empty fuel tank and refill with fresh, clean gasoline. 5.
Operate a trimmer across the face of slopes, never up or down slopes. _O 15 DEGREES Use this guide and do not trim A 10 degree A 15 degree slope slope Use extreme care at all times manual slopes. is a hill that is a hill that on a slope increases increases greater in height in height and avoid sudden for safety in trimming on slopes. Use extra care when operating than 15 degrees. at appro×imately at approximateJy turns or maneuvers. Operate a trimmer on or near slopes ! .
Garantia .......................................................... 17 Reglas de Seguridad ................................. 17-19 Especificaciones del Producto ........................ 20 Montaje / Pre-Operaci6n ................................ 20 Operaci6n .................................................. 21-23 Mantenimiento ........................................... 24-26 Programa de Mantenimiento .......................... 24 Servicio y Adjustes ....................................
I. OPERACION GENERAL • Antesde empezar,debefamiliarizarse completamente conloscontrolesy el uso correctode la maquina.Paraesto,debeleer y comprender todaslasinstrucciones que aparecenen lamaquinayen losmanuales de operaci6n. • No pongalasmanoso lospiescercao debajode laspartesrotatorias. • Mantenertodaslaspartesdelcuerpolejos delsilenciadordelescapey la lineaderotaci6n.El silenciadorcalientepuedecausar seriasquemaduras.
IV. SERVlClO • Tenga cuidado extra al manejar la gasolina y los demas combustibles. Son inflamables y los gases son explosivos. = Use solamente un envase aprobado. = Nunca remueva la tapa del depdsito de gasolina o agregue combustible con el motor funcionando. Permita que el motor se enfrie antes de volver a poner combustible. No fume. = Nunca vuelva a poner combustible en la maquina en recintos cerrados.
NOmerode Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: 1.6 Cuartos (Regularsin Plomo) Tipo de Aceite SAE 30 (Sobre Capacidad (API SG-SL): de Aceite: Bujia (Abertura: 32°F); SAE 5W-30 (Debajo 32°F) 20 Onzas .030") Champion Longitud de la Iinea de la recortadora: RJ19LM 18.75 o J19LM Inches (0.155 Inches Diametro) . El nQmero del modelo y el de serie se encuentran en la calcomania adjunta a la parte trasera de la caja de la recortadora.
FAMILIARiCESE CON SU RECORTADORA LEA ESTE MANUAL DE USUARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU RECORTADORA. Compare las ilustraciones con su recortadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden aparecer sobre su recortadora el producto. Aprenda y comprenda sus significados.
SEGURIDAD Cabeza de recortadora La operaci6n de cualquier recortadora puede hacer que salten objetos extrafios dentro de sus ojos, Io que puede producir dafios graves en estos. Siempre use anteojos de seguridad o protecci6n para los ojos mientras opere su recortadora o cuando haga ajustes o reparaciones. Recomendamos gafas de segufidad o una mascara de visi6n amplia, de seguridad usada sobre las gafas.
GASOLINA * Llene el estanque de combustible hasta la parte inferior del cuello de relleno del estanque de gasolina. No Io Ilene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el minimo de 87 octanos. No mezcle el aceite con la gasolina. Para asegurar que la gasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados , durante los primeros 30 dias. PRECAUClON: Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta.
°..A.T.......TO LLENE LAS FECHAS A MEDIDA QUE COMPLETE O_ ___FECHAS 0_.!. _ O_ S+f.+'J _9,_,_ 'O _O_ _.
_I, PRECAUCl6N: Utilice s61o la linea de recortadora recomendada. No utilice otros materiales como cables, cuerdas, cintas, etc. un cable podria romperse durante el funcionamiento y volverse un peligroso cohete que podria causar heridas serias. PARA CORTAR LA LiNEA A LA LONGITUD APROPIA NOTA: La linea de la recortadora precortada a la Iongitud apropiada esta disponible para esta unidad; vea la secci6n de las Piezas de Recambio de este manual. 4. 5. 6. 7.
Revise el nivel del aceite del carter antes de arrancar el motor y despues de cada cinco (5) horas de uso continuado. Apriete el tap6n del aceite en forma segura cada vez que revise el nivel del aceite. . Instale el cartucho, luego vuelva a poner la cubierta asegurandose que las orejas esten alineadas con las ranuras en la plancha trasera. Apriete el tornillo en forma segura.
ADVERTENClA: PARA REMOVER/AJUSTAR LA CORREA DE IMPULSI6N DEL CABEZAL DE LA RECORTADORA 1. Remueva el tornillo en el frente de la cubierta del chasis. 2. Gire la cubierta hacia arriba y a distancia de la recortadora. Para evitar lesi6nes serias ntes de dar cualquier sercicio o de hacer ajustes: 1. Pare el motor. 2. AsegQrese que las lineas rotatorias y que todas las partes movibles se hayan detenido completamente. 3.
8. Remueva la correa de la polea del cabezal de la recortadora. 9. Observe la posicidn del cable de control y del resorte de Ilamada del pifion Ioco. A continuacidn remueva el conjunto del pifion Ioco del chasis y remueva la correa y el pifion Ioco de la recortadora. 10. Remueva la correa del conjunto del pifion Ioco al remover el fijador de correa inferior y las poleas del pifion. 11. Monte la nueva correa, las poleas del pifion Ioco y el fijador de correa inferior al soporte del pifion.
formaci6n de acidos durante almacemamiento. la gasolina acideca puede na_ar el sistema de combustible de un motor durante el perido de alcamenmiento. Prepare inmediatamente su recortadora para el alma cenamiento al final de cada temporada o si la unidad no se va a usar pot 30 dias o mas. RECORTADORA • Vaciar el dep6sito del carburante poniendo en marcha el motor y dejandolo funcionar hasta que el carburante termine y el carburador este vacio.
SOLUCION DE PROBLEMAS est_ dirigido a un centro PROBLEMA - Yea la secci6n de servico apropiada CAUSA No arranca rancio. 4. Agua en el combustible. 5. Alambre de la bujfa desconectado. 6. Bujla mala. 7. La palanca de control de la aceleraci6n no esta en posici6n correcta (si existe). Perdida de potencia Vibration e×cesiva amenos que CORRECClON 1. Filtro de aire sucio. 2. Sin combustible. 3. Combustible en el manual Sears. 1. Limpie/cambie el filtro de aire. 2.
+ GU I """.._.o_D@,_ ; .. : "....... 7...... . CLINACIO VEA Y DETENGA ESTA GUIA DE NlVEL CON UN ARBOL EN POSICION VERTICAL, LA ESQUINA DE UNA ESTRUCTURA, UN POSTE DE LUZ O UNA CERCA. 1 Opere una recortadora de rnaleza v_s de las cuestas, nunca cuesta en sentido diagonal a traarriba o cuesta abajo. cO 10 GRADOS __ 15 GRADOS Utilice este guia, y no recorte en una cuesta mayor de 15 grados.
CRAFTSMAN WEED TRIMMER - - MODEL NUMBER 917.
CRAFTSMAN WEED TRIMMER KEY NO. PART NO. _ _ _ - - MODEL NUMBER 917.773743 DESCRiPTiON Engine, Briggs & Stratton, Model No.
CRAFTSMAN WEED TRIMMER 52 1 - - MODEL NUMBER 917.
CRAFTSMAN KEY NO. WEED TRIMMER PART NO. = = MODEL NUMBER 917.773743 DESCRiPTiON 1 2 3 4 174031X615 182219 173715 185476 Chassis Assembly Line, Trimmer .155 diameter x 18.75 long Screw, Self=Tapping 5/16=18 x 1 V=Belt 5 6 7 8 9 10 11 172145X004 166042 173716 73930600 166043 160829 73930500 Bracket, Idler Pulley, Idler, V=Groove Bolt, Hex Head 3/8=16 x 1.
BRIGGS & STRATTON 4-CYCLE 48 SHORT BLOCK 1058 OPERATOR'S ENGINE MANUAL MODEL NUMBER I ' 1329-REPLAcEMENTENGINE- ' 126T02=1378=B1 I 1330 REPAIR MANUAL] lO_ 718 71 306 684 11 I( 50 13U "_ 51_-_>_o_ <_ "--_ L_ 24 635 287 i [ i 525 741 l _ [ 32A i i t_ 22 36 ¢__'_ _ i i
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 563 949 604 55 ' ',_":'--.....
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 126T02=1378-B1 ................ i1°_-.
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 121 CARBURETOR 104 %_ 127 \_ _ OVERHAUL 137 KIT 617 163 276 .
BRIGGS & STRATTON KEY NO. PART NO. 1 2 697322 399269 3 4 5 7 8 9 10 11 11A 12 4-CYCLE ENGINE MODEL NUMBER 126T02=1378=B1 DESCRIPTION KEY NO. PART NO.
BRIGGS & STRATTON KEY NO. PART NO. 425 443 445 455 456 459 505 4-CYCLE ENGINE MODEL NUMBER 126T02=1378=B1 DESCRIPTION KEY NO. PART NO.
SERVICE NOTES 42
SERVICE NOTES 43
NEED MORE HELP? YOu']_[ fiTld theanswera;_id moreor_,. maaagemyhomeo{om - forfree[ o Find this and at[ your other product manua[s online. o Get answers from our team of home experts. o Get a persona[ized o Find information maintenance plan for your home. and tools to help with home projects.
Owner's Manual CRRFTSMRN° LE E T I E 675 Series Briggs & Stratton Engine 22 Inch Cut Model No. 917.773743 • EspaSol, p. 17 LJTION'. Read and follow all Safety Rules and Instructions before operating this equipment. Sears, Roebuck and Co., Hoffman Estates, Visit our Craftsman website: www.sears.com/craftsman IL 60179 U.S.A.
Warranty ................................................... 2 Safety Rules .......................................... 2-4 Product Specifications .............................. 5 Assembly / Pre-Operation ........................ 5 Operation ............................................... 6-8 Maintenance Schedule ............................. 9 Maintenance ........................................ 9-11 Service and Adjustments ................... 12-13 Storage .................................................
AWARNING" Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. A CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual before starting.
ill. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the trimming activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while moving backwards, look behind & down for small children.
Serial Number: Date of Purchase: Gasoline Capacity / Type: 1.6 Quarts (Unleaded Oil Type (API SG-SL): SAE 30 (above 32°F); SAE 5W-30 (below 32°F) Oil Capacity: 20 Ounces Spark Plug (Gap: .030") Trimmer Line Length: Champion Regular) RJ19LM or J19LM 18.75 Inches (0.155 Inch Diameter) . The model and serial numbers will be found on a decal on the rear of the trimmer. Record both serial number and date of purchase in the space provided above.
KNOW YOUR TRIMIVIER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR TRIMMER. Compare the illustrations with your trimmer to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your trimmer and understand their meaning. FAST S LOW or in literature CAUTION ENGINE supplied OFF with the product.
TO ADJUST TRIMMING HEIGHT _,CAUTION" Stop the engine and wait for all moving parts to stop. Disconnectspark plug wire from spark plug and place wire where it cannot come in contact with plug. The height of cut can be set to six (6) different positionsranging from 1-1/2 inches to 3 inches. Recommendedcutting height for the average yard is 2 inches. 1. To adjust trimming height, push in the locking plate tab and move trimmer head up or down to desired position. 2.
ADD GASOLINE • Fill fuel tank to bottom of gas tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. A CAUTION" Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. NOTE: In cooler weather it may be necessary to repeat priming steps.
MAINTENANCE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE T Check for Loose Fasteners R Clean Trimmer I M Clean Under Engine Cover i/ t/ v' !_2 Check Drive Belt / Pulleys R Check / Replace Trimmer Lines 1_3 Check Engine Oil Level Change Engine Oil t#4'1,2 Clean Air Filter Inspect Muffler If I_ 2 Clean or Replace Spark Plug Replace Air Filter Paper Cartridge 1 - Change more often when operating under a heavy load or in high ambient temperatures.
TRIMMER Always observe safety rules when performing any maintenance. TIRES . Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. TRIMMER LINE For best results, replace trimmer lines when they have worn to half their original length. Use .155 inch diameter trimmer line. Cut new trimmer line length to 18-3/4 inches.
ENGINE LUBRiCATiON 6. Replace engine oil cap. 7. Reconnect spark plug wire to spark plug. Use only high quality detergent oil rated with API service classification SG-SL. Select the oil's SAE viscosity grade according to your expected operating temperature. AIR Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions.
A:;I, CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. • Turn trimmer on its side. Make sure air filter and carburetor are up. Clean the underside of your trimmer by scraping to remove build-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. Keep finished surfaces and wheels free of all gasoline, oil, etc.
9. Note the position of the control cable and idler return spring, then remove idler assembly from chassis and remove belt and idler from trimmer. 10. Remove belt from idler assembly by removing bottom belt keeper and idler pulleys. 11. Assemble new belt, idler pulleys and bottom belt keeper to idler bracket. Tighten pulley bolts securely. NOTE: Be sure belt is inside top belt keeper on idler assembly. 12. Position belt and idler assembly in trimmer, reconnect idler spring and assemble idler to chassis.
Immediately prepareyour trimmer for storage at the end of the season or if the unit will not be usedfor 30 days or more. TRIMMER When trimmer is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire trimmer (See"CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened.
TROUBLESHOOTING to a Sears Parts PROBLEM Does not start =See appropriate section in manual & Repair Center. CAUSE unless directed CORRECTION 1. Dirty air filter. 2. Out of fue!. 3. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. Bad spark plug. 7. Throttle control lever not in correct position (if equipped). 1. Clean/replace air filter. 2. Fill fuel tank. 3. Empty fuel tank and refill with fresh, clean gasoline. 4. Empty fuel tank and refill with fresh, clean gasoline. 5.
Operate a trimmer across the face of slopes, never up or down slopes. _O 15 DEGREES Use this guide and do not trim A 10 degree A 15 degree slope slope Use extreme care at all times manual slopes. is a hill that is a hill that on a slope increases increases greater in height in height and avoid sudden for safety in trimming on slopes. Use extra care when operating than 15 degrees. at appro×imately at approximateJy turns or maneuvers. Operate a trimmer on or near slopes ! .
Garantia .......................................................... 17 Reglas de Seguridad ................................. 17-19 Especificaciones del Producto ........................ 20 Montaje / Pre-Operaci6n ................................ 20 Operaci6n .................................................. 21-23 Mantenimiento ........................................... 24-26 Programa de Mantenimiento .......................... 24 Servicio y Adjustes ....................................
I. OPERACION GENERAL • Antesde empezar,debefamiliarizarse completamente conloscontrolesy el uso correctode la maquina.Paraesto,debeleer y comprender todaslasinstrucciones que aparecenen lamaquinayen losmanuales de operaci6n. • No pongalasmanoso lospiescercao debajode laspartesrotatorias. • Mantenertodaslaspartesdelcuerpolejos delsilenciadordelescapey la lineaderotaci6n.El silenciadorcalientepuedecausar seriasquemaduras.
IV. SERVlClO • Tenga cuidado extra al manejar la gasolina y los demas combustibles. Son inflamables y los gases son explosivos. = Use solamente un envase aprobado. = Nunca remueva la tapa del depdsito de gasolina o agregue combustible con el motor funcionando. Permita que el motor se enfrie antes de volver a poner combustible. No fume. = Nunca vuelva a poner combustible en la maquina en recintos cerrados.
NOmerode Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: 1.6 Cuartos (Regularsin Plomo) Tipo de Aceite SAE 30 (Sobre Capacidad (API SG-SL): de Aceite: Bujia (Abertura: 32°F); SAE 5W-30 (Debajo 32°F) 20 Onzas .030") Champion Longitud de la Iinea de la recortadora: RJ19LM 18.75 o J19LM Inches (0.155 Inches Diametro) . El nQmero del modelo y el de serie se encuentran en la calcomania adjunta a la parte trasera de la caja de la recortadora.
FAMILIARiCESE CON SU RECORTADORA LEA ESTE MANUAL DE USUARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU RECORTADORA. Compare las ilustraciones con su recortadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden aparecer sobre su recortadora el producto. Aprenda y comprenda sus significados.
SEGURIDAD Cabeza de recortadora La operaci6n de cualquier recortadora puede hacer que salten objetos extrafios dentro de sus ojos, Io que puede producir dafios graves en estos. Siempre use anteojos de seguridad o protecci6n para los ojos mientras opere su recortadora o cuando haga ajustes o reparaciones. Recomendamos gafas de segufidad o una mascara de visi6n amplia, de seguridad usada sobre las gafas.
GASOLINA * Llene el estanque de combustible hasta la parte inferior del cuello de relleno del estanque de gasolina. No Io Ilene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el minimo de 87 octanos. No mezcle el aceite con la gasolina. Para asegurar que la gasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados , durante los primeros 30 dias. PRECAUClON: Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta.
°..A.T.......TO LLENE LAS FECHAS A MEDIDA QUE COMPLETE O_ ___FECHAS 0_.!. _ O_ S+f.+'J _9,_,_ 'O _O_ _.
_I, PRECAUCl6N: Utilice s61o la linea de recortadora recomendada. No utilice otros materiales como cables, cuerdas, cintas, etc. un cable podria romperse durante el funcionamiento y volverse un peligroso cohete que podria causar heridas serias. PARA CORTAR LA LiNEA A LA LONGITUD APROPIA NOTA: La linea de la recortadora precortada a la Iongitud apropiada esta disponible para esta unidad; vea la secci6n de las Piezas de Recambio de este manual. 4. 5. 6. 7.
Revise el nivel del aceite del carter antes de arrancar el motor y despues de cada cinco (5) horas de uso continuado. Apriete el tap6n del aceite en forma segura cada vez que revise el nivel del aceite. . Instale el cartucho, luego vuelva a poner la cubierta asegurandose que las orejas esten alineadas con las ranuras en la plancha trasera. Apriete el tornillo en forma segura.
ADVERTENClA: PARA REMOVER/AJUSTAR LA CORREA DE IMPULSI6N DEL CABEZAL DE LA RECORTADORA 1. Remueva el tornillo en el frente de la cubierta del chasis. 2. Gire la cubierta hacia arriba y a distancia de la recortadora. Para evitar lesi6nes serias ntes de dar cualquier sercicio o de hacer ajustes: 1. Pare el motor. 2. AsegQrese que las lineas rotatorias y que todas las partes movibles se hayan detenido completamente. 3.
8. Remueva la correa de la polea del cabezal de la recortadora. 9. Observe la posicidn del cable de control y del resorte de Ilamada del pifion Ioco. A continuacidn remueva el conjunto del pifion Ioco del chasis y remueva la correa y el pifion Ioco de la recortadora. 10. Remueva la correa del conjunto del pifion Ioco al remover el fijador de correa inferior y las poleas del pifion. 11. Monte la nueva correa, las poleas del pifion Ioco y el fijador de correa inferior al soporte del pifion.
formaci6n de acidos durante almacemamiento. la gasolina acideca puede na_ar el sistema de combustible de un motor durante el perido de alcamenmiento. Prepare inmediatamente su recortadora para el alma cenamiento al final de cada temporada o si la unidad no se va a usar pot 30 dias o mas. RECORTADORA • Vaciar el dep6sito del carburante poniendo en marcha el motor y dejandolo funcionar hasta que el carburante termine y el carburador este vacio.
SOLUCION DE PROBLEMAS est_ dirigido a un centro PROBLEMA - Yea la secci6n de servico apropiada CAUSA No arranca rancio. 4. Agua en el combustible. 5. Alambre de la bujfa desconectado. 6. Bujla mala. 7. La palanca de control de la aceleraci6n no esta en posici6n correcta (si existe). Perdida de potencia Vibration e×cesiva amenos que CORRECClON 1. Filtro de aire sucio. 2. Sin combustible. 3. Combustible en el manual Sears. 1. Limpie/cambie el filtro de aire. 2.
+ GU I """.._.o_D@,_ ; .. : "....... 7...... . CLINACIO VEA Y DETENGA ESTA GUIA DE NlVEL CON UN ARBOL EN POSICION VERTICAL, LA ESQUINA DE UNA ESTRUCTURA, UN POSTE DE LUZ O UNA CERCA. 1 Opere una recortadora de rnaleza v_s de las cuestas, nunca cuesta en sentido diagonal a traarriba o cuesta abajo. cO 10 GRADOS __ 15 GRADOS Utilice este guia, y no recorte en una cuesta mayor de 15 grados.
CRAFTSMAN WEED TRIMMER - - MODEL NUMBER 917.
CRAFTSMAN WEED TRIMMER KEY NO. PART NO. _ _ _ - - MODEL NUMBER 917.773743 DESCRiPTiON Engine, Briggs & Stratton, Model No.
CRAFTSMAN WEED TRIMMER 52 1 - - MODEL NUMBER 917.
CRAFTSMAN KEY NO. WEED TRIMMER PART NO. = = MODEL NUMBER 917.773743 DESCRiPTiON 1 2 3 4 174031X615 182219 173715 185476 Chassis Assembly Line, Trimmer .155 diameter x 18.75 long Screw, Self=Tapping 5/16=18 x 1 V=Belt 5 6 7 8 9 10 11 172145X004 166042 173716 73930600 166043 160829 73930500 Bracket, Idler Pulley, Idler, V=Groove Bolt, Hex Head 3/8=16 x 1.
BRIGGS & STRATTON 4-CYCLE 48 SHORT BLOCK 1058 OPERATOR'S ENGINE MANUAL MODEL NUMBER I ' 1329-REPLAcEMENTENGINE- ' 126T02=1378=B1 I 1330 REPAIR MANUAL] lO_ 718 71 306 684 11 I( 50 13U "_ 51_-_>_o_ <_ "--_ L_ 24 635 287 i [ i 525 741 l _ [ 32A i i t_ 22 36 ¢__'_ _ i i
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 563 949 604 55 ' ',_":'--.....
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 126T02=1378-B1 ................ i1°_-.
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 121 CARBURETOR 104 %_ 127 \_ _ OVERHAUL 137 KIT 617 163 276 .
BRIGGS & STRATTON KEY NO. PART NO. 1 2 697322 399269 3 4 5 7 8 9 10 11 11A 12 4-CYCLE ENGINE MODEL NUMBER 126T02=1378=B1 DESCRIPTION KEY NO. PART NO.
BRIGGS & STRATTON KEY NO. PART NO. 425 443 445 455 456 459 505 4-CYCLE ENGINE MODEL NUMBER 126T02=1378=B1 DESCRIPTION KEY NO. PART NO.
SERVICE NOTES 42
SERVICE NOTES 43
NEED MORE HELP? YOu']_[ fiTld theanswera;_id moreor_,. maaagemyhomeo{om - forfree[ o Find this and at[ your other product manua[s online. o Get answers from our team of home experts. o Get a persona[ized o Find information maintenance plan for your home. and tools to help with home projects.