Manual

BEFORE STARTING THE ENGINE (Cont'd.)
OPERATING CONTROLS
Become thoroughly familiar with the operating controls
before starting the engine.
The following controls are used to operate the tractor.
\
The gear shift lever selects the Forward speeds,
NeutraI, and the Reverse positions required.
HOW TO START ENGINE
CAUTION: Before starting the engine, check to see
that eontrois are as fotJows:
Transmission gear shift lever, refer to Fig. 6, is in
NEUTRAL, In Neutrat the gear shift lever is free
to move forward and backward, tt wit! operate simi-
lar to an automobile.
FIG. 5
The Drive, Ctutch and Broke pedal is shown in
Fig. 5. This pedal operates a combination brake
and drive dutch. There are three positions of
operation:
a. The tractor is in Drive when the pedal is all the
way out--foot removed from pedal.
b. The tractor is in Neutral when the pedal is de-
pressed half way.
c. The Brake is in operation when pedal is pressed
oil the way forward.
GASOLINE SHUT
OFF VALVE
FIG_7
2. Open gasoline shut-off valve located on L.H. side
of gas tank. Refer to Fig. 7. Turn in counter-
clockwise direction.
\
\
FIG. 6
2. The Transmission gear shift lever
front center of seat. Refer to Fig. 6.
is focated at
.
FIG.8
To start a cold engine, pull out on choke control,
refer to Fig. 8.
-6-