Owner`s manual

16 - ENG
7. Usinganadjustablewrench
remove the regulator manifold.
8. Apply pipe sealant to new
regulator manifold and assemble,
tighten with wrench.
9. Reapply pipe sealant to safety
valve.
10. Reassemble all components in
reverse order of removal. Make
sure to orient gauges to read
correctly and use wrenches to
tighten all components.
5. Remove pump mounting screws
securing pump (one on each side).

6. Carefully slide pump from
brackets and out of the way.







Before you store the air compressor,
make sure you do the following:
1. Review the Maintenance section
on the preceding pages and per-
form scheduled maintenance as
necessary.
2. Drain water from air tank. See To
 under Maintenance.
Water will condense

not drained, water will corrode and

.
3. Protect the electrical cord and air
hose from damage (such as being
steppedonorrunover).Wind
them loosely around the compres-
sor handle.
4. Store the air compressor in a
clean and dry location.