Owner`s manual

17 - ENG
4. Using an adjustable wrench, loos-
en outlet tube nut at air tank and
pump head. Carefully move outlet
tube away from check valve.
Nuts
Outlet



5. Unscrew the check valve (turn
counterclockwise) using a 7/8"
open end wrench.
6. Install the new check valve (turn
clockwise).
7. Replace the outlet tube and
tighten nuts.
8. Replace the shroud.

















1. Release all air pressure from air
tank. See  in the
Maintenance section.
2. Unplug outfit.
3. Remove the shroud on the outlet
tube side. Remove screw
with T-20 Torx screwdriver and
loosen all the tabs on the shroud
with a flat screwdriver before
removing.