Owner`s manual

CUSTOMER RESPONSIBILITIES TABLE
Before Every25 Every50 Every100
MAINTENANCE TASK each use hours or hours or hours or
yearly yearly yearly
ENGINE
check oil level X
change oil X
check air filter X
clean/replace spark plug X
PRESSURE WASHER
checWclean inlet screen X
check high pressure hose X
check soap and chemical ×
hose and filter
check gun and wand for leaks X
prepare for storage Prepare unitfor storage if itis toremainidlefor longer
than 30days
ENGINE
To Check Oil
1. Shut down engine and place on a
level surface.
2. Remove filler cap/dipstick and
wipe it clean.
Filler cap/dipstick
3, Insert and remove the filler
cap/dipstick without screwing it
into the filler neck. Check the oil
level shown on the dipstick.
4. If the oil level is low, fill to the
edge of the oil filler hole with the
SAE 10W-30 oil.
NOTE: Other viscosities shown in the
chart may be used when the average
temperature in your area is within the
recommended range.
SAE Viscosity Grades
N
_20 0 20 3240 60 80 1,00-
D -30 -20 qO 0 10 20 30 40
STARTING TEMPERATURES RANGE
ANTICIPATED BEFORE NEXT OIL CHANGE
15- ENG D25852