Manual

Befo]e Each Start-Up:
I. Place On/Auto/Off lever to
"OFF" end close air regulator.
2. Pull regulator knob out, turn
counterclockwise until it stops.
Push knob in to lock in place.
3 Attach hose and accessories.
NOTE: The hose or accessory
will reuu_re e quick connect plug
if the air outlet is equipped with a
quick connect socket.
I_1_ Too much air
pressure causes a
hazardous risk of bursting. Check
the manufacturer's maximum
pressure rating for air tools and
accessories, The regulator outlet
pressure must never exceed the
maximum pressure rating.
}-low to Start:
1. Turn the On/Auto/Off lever to
"AUTO" and allow tank pressure
to build, Motor will stop when
tank pressure reaches "cut-out"
pressure.
2,
Pull the regulator knob out and
turn clockwise to increase
pressure. Whet_ the desired
pressure is reached push knob in
to lock in place, The compressor
is ready for use.
NOTE; Always operate the air
compressor in well-ventilated areas
free of gasoline or olher combustible
vapors, If the compressor isbeing
used to op_rate a sprayer DO NQT
place near the sprayarea.
D_6336 14- ENG