Manual

To Replace Regulator
1. Release all air pressure from air
tank. See "To Drain Tank' inthe
Maintenance section.
2 Unplug unit.
3, Using an adjustable wrench
remove the outlet pressure
gauge and quick connect from
the regulator
6, Assemble the regulator and
orient as shown.
NOTE: Arrow indicates flow of air,
Make sure it is pointing in the
direction of air flow.
4. Remove the regulator.
5. App{y pipe sealant tape to the
nipple on the standpipe.
7.
8.
Reapply pipe sealant to outlet
pressure geuge and quick
connect.
Reassemble outlet pressure
gauge and quick connect. Orient
outlet pressure gauge to read
correctly, Tighten connect with
wrench,
17- ENG D2633S