OWNER'S MANUAL CRRFTSMIIN 5.0 Horsepower 1800 PSI 2.0 GPM High Pressure Washer Model No: 919.679180 • Safety • Assembly • Operation • Maintenance WARNING: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. • Parts List • Fran£_ais Sold MGP-e7918GA 5/26/S9 by Sears Canada, Inc., Toronto, Ont.
TABLE OF CONTENTS Warranty ............................................ Safety Guidelines 2 .............................. Service and Adjustments 3-4 Storage ................ 13-14 .................................................. 14 Assembly ........................................... 5-6 Troubleshooting Operation ........................................... 6-9 Parts ................................................ 16-27 EPA Codes ......................................
SAFETY GUIDELINES - DEFINITIONS This manualcontainsinformation that is importantfor you to know and understand.This informationrelates to protecting YOUR SAFETYand PREVENTINGEQUIPMENTPROBLEMS.Tohelp you recognizethis information,we usethe symbols below. Pleaseread the manualand pay attentionto these sections.SAVETHESE DEFINrrloNS/INSTRUCTIONS. A WARNING indicates a potentially situation which, if not avoided, _ death or serious iniurv.
IMPORTANT HAZARD RISKOF UNSAFE OPERATION SAFETY INSTRUCTIONS WHAT CAN HAPPEN Unsafe operationof your pressure washer could lead to serious injury or death to you or others. • The spray gun/wand is a powerful cleaningtool that could look like a toy to a child. Reactive force of spray will cause gun/wand to move, and could cause the operatorto slip or fall, or misdirect the spray.Improper control of gun/wand can result in injuriesto self and others.
IMPORTANT SAFETY INSTRUCTIONS (cant'd) HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT RISK OF HOT SURFACES • Contact with hot surfaces,such as engines exhaust components, could result in sedous bum. • Duringoperation,touch onlythe control surfaces of the pressure washer. Keep children away from the pressurewasher at all times. They may not be able to recognizethe hazards of this product.
, Tools Required for Assembly Adjustable wrench Allen wrench Remove Pressure Washer from Carton • Open carton from the top. Locate and remove from box the handle, gun, wand, videotape, and oil. • Cut carton along doffed lines. • Remove all carton inserts. Mount the rubber isolator to the frame. To mount isolatorplace threaded end of bolt throughthe washer. • Next with washer on bolt place threaded end of bolt throughthe largerhole in bottom of the rubberisolator.
Pull the cord under the wire bracket to the right of the wire loop. Lift the pull cord handle up and slide the cord to the left sliding the cord into the wire loop. Next slide handle behind the wire bracket to the left of the wire loop. Engine recoil will pull the cord into its final position. 7. Place assembled gun and wand on pressure washer holder. Checklist Before going any further please review the following: • Be sure you have completed assembly instructions.
Before to operate equipment until you have read Owners for Safety, Operation, and Maintenance A Manual ARNING: Read Owner's Manual. Do not attempt I Instructions. To operate the engine you will need to do the following. I I every start. Runningengine low of oilor out of oil I h, CAUTION: Always check engine oil level before I could resultin sedous damage. A, WARNING: Never adjust spray pattern when spraying. Never put hands in front of spray nozzle to adjust spray pattern you could be injured.
• Squeeze trigger on pressure washer wand to relieve air pressure caused by turning on the water. Water will spew out of the gun in a thin stream. This will make it easier to start the engine. Use clean, fresh, regular unleaded gasoline with a minimum of 85 octane. Do not mix oil with gasoline. If unleaded fuel is unavailable leaded fuel may be used. IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor,fuel filter hose or tank during storage.
How To Use Your Pressure Washer On the end of your spray gun is a nozzle that you can slide forward and backward and that you can also twist from side to side. With the adjustable nozzle you can adjust the spray pattern to either high pressure or low pressure. You can also adjust the spray so it is concentrated in a stream pattern or expanded into a fan pattem.
CUSTOMER RESPONSIBILITIES TABLE MAINTENANCE TASK Beforeeach use Every25 hoursor veadv Every50 houmorveadv Every100 hoursor veadv PRESSURE WASHER Check/clean inletscreen, Check hiah pressurehose.
Pressure Washer Maintenance Changing Check and Clean Inlet Screen: Examine inletscreen on pump inlet fitting. Clean if clogged; replace if tom. Engine Oil • Change oil while engine is stillwarm. Preferably drain oil from top of engine as illustrated below. Drain oilwith air cleaner side up, Oil can be drained from engine bottom if necessary. Check High Pressure Hose: High pressure hose can develop leaks from wear, kinking,abuse. Inspect hose each time before use.
Clean Pre-Cleaner and Air Cleaner Cartridge NOTE: Do not use petroleum solvents,e.g., kerosene, which willcause the cartridge to detedorete. Do not use pressurizedair to clean cartridge. Pressurized air can damage the cartridge. Your engine is equipped with an oval dual element air cleaner: the two elements include a foam pre-cleaner and an air cleaner cartridge. • To remove the air cleaner element, loosen two cover screws and lift cover. Carefully remove foam precleaner and air cleaner cartridge.
3. Pull tdgger on gun handle to relieve any water pressure. 4. Disconnect the wand from the gun. 7. Direct water supply into nozzleend to backflush loosened particles for 30 seconds. 5. Remove nozzle from the the end of the wand with the 2ram allen wrench provided. 6. Clean the nozzle usingthe nozzle cleaner provided or a straightened paper clip. Insert intothe nozzle end and work back and forth untilobstructionsis removed. 8. Reassemble the nozzle to the wand. Tightan securelyto prevent leaks. 9.
SYMPTOM Engine won't start Won't Draw Chemical Pump running normally but pressure does not achieve rated values CAUSE 1. Engine throttleis in "OFF" SOLUTION Position. 2. Choke lever has not bean placed to choke, 3. Pressure buildup after initial use. 1. Slide throttle to "Run" position. 2. Slide choke lever to choke position. 1. Nozzle not in chemical draw position. 2. Chemical screen is obstructed. 3. Chemical screen not working. 1. Push nozzle forward at end of wand. 2.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 3 19 24 8 5 20 22 21 REF NO.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 Ref. Part No. No. _ PUMP BREAKDOWN _v.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL #12F802-2017 287 684t 615e 404_ 177 616 525 10810 307 8 306 6356 REF. NO. PART NO, 1 2 493260 399269 3 5 *299819 691160 13_ DESCRIPTION REQUIRES SPECIAL TOOLS TO INSTALL SEE REPAIR INSTRUCTION MANUAL REF. NO.
CRAFTSMAN 2400 pSI HIGH pRESSURE WASHER 919.679t80 BRIGGS ENGINE MODEL 912F802-2017 27 O REF. NO. 25 PART NO. 499429 DESCRIPTION REF. NO. PARt" NO. 26 499425 Piston Assembly 27 263190 DESCRIPTION Ring Set (Standard} Piston Pin Lock (Used After Code Date 97011200). * • REF. NO. 28 pART NO.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL # 12F802-2017 24 ;-II I NO. lS I'AIII NO. D L::$,r.:m.-"i 'O "-- tiFF I'_€,) PAnT N(_ I]' _;4:1111' II[)N RF.F. NI) PART N_I I_ ._;(;I III'LII)N 691461 Cmnle;h_.ft 24. 1411 3_;7A 741 Inoluded Inra_r.,ket.,..:.et _e,_.14,_N_ _,0 h,4:k_|wd i. ¢.:_.ibur,.l,_._ KiI. :Br..:e p,,:f..NlO,121. 222Q91) I Iy_tlOOl K_ _4.'111 Ilrl_JOKM _, 94_,',?.9K,cy Drive. Pulley _R]_.'IRh [;_t- hmlrv_ Irlr:hllJi4tJ i|1( ;+rl _.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL #12F802-2017 374_ 46A 15_ 374 715_ 101 REF. NO. PART NO. 4A 12 15 15A 20 493365 *272198 94880 94470 *399781 29A 391484 22 94220 DESCRIPTION REF. NO. PART" NO. 46 691445 Engine Sump Crankcase Gasket Oil Dmin Plug Oil Drain Plug OII Seal (PTO Side) Oil Seal (PTO Side) Screw DESCRIPTION Camshaft REF. NO. 83 PART NO. 231671 46A 691459 Used on Type No(s).
CRAFTSMAN 2400 PSi HIGH PRESSURE 1=51 WASHER 919.679180 I PRIMER BRIGGS ENGINE MODEL 1112F802-2017 SYSTEM I f 124 e7, 1137< 708 1_--_'_- 130 95 _ REF. NO. PART NO. 95 94098 97 104 117 493267 e691242 494870 DESCRIPTION REF, NO. 110 _) 617 PART NO. Screw (Throttle Valve) Throttle Shaft Float Hinge Pin Main Jet _ DESCRIPTION 1100 REF. NO. PART NO. DESCRIPTION ........ 498254 497315 Main Jet (High Altitude) (Used After Code Date 96O6O2OO). 496495 Main Jet Note .....
CRAFTSMAN 2400 BRIGGS ENGINE MODEL # 12F802-2017 PSI HIGH PRESSURE WASHER 919.679180 365% 708A 0 F_-'] 12_ 0A 95_ Ic. s,s+ REF. NO, 94 95 97 98 104 108 109 109A PART NO. DESCRIPTION e493765 Idle Mixture Kit 94096 Screw (Throttle Valve) 493267 Throttle Shaft 398t 85 Idle Speed Kit e691242 Float Hinge Pin 223471 Choke Valve 494218 Choke Shaft 498593 Choke Shaft °'+ REF. NO. PART NO. 125A 498965 DESCRIPTION Carburetor FIEF. NO.
BRIGGS ENGINE MODEL #12F802-2017 CRAFTSMAN 2400PSiHIGH PRESSURE WASHER 919,679180 Rcr. PP_T "J(1. 20g N¢). Rcr. r)l-_C:.:-ll P I I,;)N 0_3'i2eJ2 _ _tirG:i- Governt:r Irluludad iraC.,_P_L Sel-_e N() I PA_T N_) I_F.-_r_,T, ON I ' ;AH No. No. or.£.cNlr 2531:144_prm;_ [_av. n_r, i_,>,_. • include(:[ In _/bur_or _ar, ki_t .%_t up._ HRt RT7 r I,. Irluluded in Valw Owrhaul Go_k_t _L-'t _o_ H_. N_',. l,_r_r,.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL #12F802-2017 L, , .._':) t!,,+! ' tl 940 _,,_" 091_9_0 _ `'" ":_'_]* ...." 621 +_ Use With Choke Type, Cm'bulBto¢ "r"11%%11% g84 r... '°:' ,0,
CRAFTSMAN 2400 BRIGGS ENGINE MODEL 112F802-2017 PSI HIGH PRESSURE WASHER 919.679180 tY I I 269 z 268 , 270 265 '_" 265A {_' 334 _' .., ,.. ...S",_..., ""..:'_ ,_-'-,:,.... RFF i'qO. R[F, PART NC.. 270 25_A L:_B C_ln_t-r.;orttrol Wnro (72 _ Lollg, _;Jt to Hc_iulro,_ L_ngtfl; ....... Not_ ..... _P_tD72 CaEin 9 ,-3o'_trnl W_m 25_ _ RF.F NO, 271 33,3 3a4 Nut {_.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919,679180 BRIGGS ENGINE MODEL # 12F802-2017 m | 9zlB ..L • i _iq.,. "-.. '_'--f ,"._ .,....:., t ,°:" _.:-":':"" - _,_"" ...:::'"I .:.:,.. ,.... ../"" ,....... ../." '-... .° ..°'" 670''_ i RFF NO. F_.RT NO. D _ESCRIPT'ON RFF NO. 101 397974 C,._p--uel "_fr k. tva7 492790 Lir_'-[-uel 2_004 N,_te Lirlu- f"L,ul 4501 _0|A P,adTl" NO. 1(:136EMISSIONS L_J-_GHIPI ION 93063 Cl_mp Ho;e (GrReri;, 9,TB0"/ Clar_p I IGm ([:].
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL # 12F802-2017 23A 37 I 304 305_ 925 REF. NO. PART NO. 23A 492175 DESCRIPTION REF. NO. 304 37 73 PART NO. 493293 DESCRIPTION REF. NO. PART NO. DESCRIPTION Housing-Blower Flywheel 224511 Guard-Flywheel 691222 Screen-Rotating 305 591108 Screw 332 363 455 925 92284 19069 691219 690595 (Blower Housing) Nut-Flywheel Flywheel Puller Cup-Flywheel Cover-Linkage Included in Carburetor Gasket Set-See Ref. 977.
CRAFTSMAN 2400 PSi HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL #12F802-2017 689 0 L REF. NO. PART NO. 55 691421 58 280399 59 60 60A 396892 281434 393152 DESCRIPTION Rewind Starter Housing Starter Rope (Cut To Ri_luired Length) Grip Insert Starter Rope Grip Starter Rope Grip REF. NO. PART NO. 65 94904 144 456 459 498144 281503 281505 DESCRIPTION Screw (Rewind Starter) Pulley/Spring Assy Plate-Pawl Friction Pawl- Retchet Included in Gasket Set-See Ref. No. 358.
CRAFTSMAN 2400 PSI HIGH PRESSURE BRIGGE ENGINE MODEL #12F802-2017 WASHER 919.679180 68 592 _) 1 689O 456 I_ 461 946 L REF. NO. PART NO. 55 891421 58 280399 59 60 60A 396892 281434 393152 Included Included DESCRIPTION Rewind Starter Housing Starter Rope (Cut To Required Length) Grip Insert Starter Rope Grip Starter Rope Grip REF. NO. PART NO, 65 g4904 144 456 459 4_144 281503 281505 DESCRIPTION Screw (Rewind Starter) Pulley/Spring Assy Plate-Pawl Friction Pawl- Ratchet REE NO.
CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.679180 BRIGGS ENGINE MODEL #12F802-2017 S92 . ..," ! / .p" ,,,._,. _'-. •.;-_ --...." ._. ...:.. .i _ _'-7_. _u t.. t .. .7,.... •-:-.,-'--_..=. -;_;.,.: .. ,, PAH I NO. r'iF!l .P,RIPTil"lN _.F.l". Nl_l llS PAINT N:). _cr. r_._t'_,R'llaTION N_) PART N_ _1_89 21K]_99 Hetvlrill '_t;l-lcr ,._pr,_f_ _t_rt_.r -IDI_ r_RIFITION 949(14 HCmW H_IJ_I_ 57A 511 ,o" 946 ..q..;, 101 Ht-f', NO. • _'_...:_..
CRAFTSMAN 2400 PSI HIGH PRESSURE 35BEHG_E 177 .t" ......._ OVERHAULGASKETSET "_i_" 3 _,_, ..,J,._ 1081 _.'$ _... _ ..._ <;,:.,_. :_ / 1095 VALVE OVERHAUL GASKET SET HLI. NO F',/,.'_T NC). 3; *QggwI_) I;I-P;'L:HIP 1 I_N 977 CARBURETOR GASi_ET SET r_EF. NO. PAFI'r NO. _J_E.,_3 RIl>'i'lON RFF NO. PAR1 NO.
Bdggs &Stratton Corporation (B&S), theCalifornia AirResources Board (CARB) andtheUnited States Environmental Protection Agency (U.S. EPA) Emission Control System Warranty Statement (Owner's Defect Warranty Rights andObligations) Intheintarast of theenvironment,B&Seegines thatmeet stricternis- TO CERTIFIED ENGINES PURCHASED IN CALIFORNIAIN 1995 sionrequirernentsarelabeled,"Thlaenginasontormeto 1995-1998 AND THEREAFTER, WHICH ARE USED IN CALIFORNIA, AND Califomia emissionregulationsfor ULGE enginesand U.S.
Bdggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs. Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. For example, warranty would not apply if engine damage occurred because of misuse, lack of routine maintenance, shipping, handling, warehousing or improper installation.
_ARS OWNER'S MANUAL CRAFTSMAN The model number of your Sears Air Compressor found can be on the maintenance label on the top of the shroud or on the bar code label on the rear of the air tank. MODEL NO. 919.679180 SERVICE AND REPAIR PARTS CALL 1-800-665-4455" Keep this number handy should you require a service SERVICE call or need to order repair parts. If ordering parts make sure you have the name, make and model no. of the merchandise and the name and number of the part you wish to order.
