Manual

CUSTOMER RESPONSIBILITIES TABLE
Every25 Every50 Every100
MAINTENANCE TASK Beforeeach use hoursor veadv houmorveadv hoursorveadv
PRESSURE WASHER
Check/clean inletscreen, x
Check hiah pressurehose. x
Check soaoand chemicalhoseandfilter x
Check gun andwandfor le_ks, x
Purge oumoof air and contaminants x
ENGINE
Gheck0il level x
Char_aeengine oil }_
Clean air cleaner and orecleaner x
ClearVreolacestark clua x
Clean enoinemuffler & flnoer auard x
IPreDarefor storaee Precareunitfor storaneif it is to remainidlefor Ionaerthan30 davs.
Product Specifications
Pressure Washer Specifications
I Pressure 1600
Flow Rate 2.0 GPM
Cleaning Units (psi x GPM) 3600
Engine Specifications
RPM 3600
Rated Horsepower 5.0
Spark Plug Gap %030" (0.76mm)
Gasoline Capacity 1.5 quarts
Oil (22 oz. capacity) SAE 30 weight
General Recommendations
The warranty of the highpressure washer does not
cover itemsthat have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.
Some adjustmentswill need to be made periodically to
maintain your high pressure washer.
Once a year you should clean or replace the spark
plug, and clean or replace the air filter, and thoroughly
check the gun and wand assembly for wear. A clean
spark plug and clean air filter assure proper fuel-air
mixture and help your engine run better and last longer.
Your pressure washer pump is a sealed pump; you
should never have to add or change the oil.
NOTE: Over time the o-rings in the gun assembly
become worn. Attached to your owners manual is a
replacememt o-ring and split backup ring.
O-ring_._ _---- Split Backup
-_"_ _v Ring
11