Product specifications

_.IR FILTER
"ourengine will not run properly and may
e damaged by using a dirty air filter.
laplace the air filter every year, more
ften if you mow in very dusty, dirty
onditions. Do not wash air filter.
O CHANGE AIR FILTER
Remove the air filter by turning counter-
clockwise to the stop and pull away
from collar.
Remove filter from inside of cover.
Clean the inside of the cover and the
collar to remove any dirt accumulation.
Insert new filter into cover.
Put air filter cover and filter into collar
aligning the tab with the slot.
Push in on cover and turn clockwise to
tighten.
Collar Trun counter
clockwise to
Clip tighten
3t
Air filter
Air filter cover
Turn
clockwise to
remove
MUFFLER
Inspect and replace corroded muffler as it
could create a tim hazard and/or damage.
SPARK PLUG
Change your spark plug each year to make
your engine starteasier and run better. Set
spark plug gap at .030 inch.
CLEANING
IMPORTANT: For best performance,
keep mower housing free of built-up
grass and trash. Clean the underside of
your mower after each use.
ACAUTION: Disconnect spark plug wire
from spark plug and place wire where it
cannot come in contact with the spark
plug.
• Turn lawn mower on its side. Make sure air
filter and carburetor are up. Clean the
• underside of your lawn mower by scraping
to remove build-upof grass and tre.sh.
• Clean engine often to keep trash from
accumulating. A clogged engine runs
hotter and shortens engine life.
• Keep finishedsurfaces and wheels free of
all gasoline, oil,etc.
• We do not recommend using a garden
hose to clean lawn mower unless the
electrical system, muffler, air filterand
carburetor are covered to keep water out.
Water in engine can result in shortened
engine life.
11